2009 Chevrolet Colorado Oil Filter Adapter

Install a new Oil Filter and tighten it to 30 Nm. Tighten the oil pan drain plug to 25 Nm. Next, remove the oil drain pan from under the vehicle and inspect for oil leaks. Inspect for oil leaks and install the oil level indicator.

Apply a 5 mm bead of sealant 20 mm long to the engine block. Install the Oil Pan, oil pan gasket, and bolts to the engine block. Next, install the 2 lower bellhousing bolts and the 2 lower A/C compressor bracket bolts and tighten them to 50 Nm. After that, install the battery cable channel to the oil pan, and the battery cable channel bolt to the oil pan and tighten to 12 Nm. Install the flywheel inspection cover, the starter, and the inner axle shaft. Finally, fill the engine with oil and install the front differential.

Install the O-ring seal onto the oil level indicator tube and the oil level indicator tube behind the exhaust manifold. Next, install the oil level indicator tube into the block, install the oil level indicator tube bolt and tighten to 25 Nm. Finally, install the oil level indicator to the tube and the cylinder number 2 spark plug and wire.