< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Equinox
< Back to View All
Control Arms & Suspension Rods
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Equinox Knuckle
PartNumber: 23343507
Product Specifications- Notes: 2 Wheel Drive, W/Sport Susp; All Wheel Drive; Equinox, Torrent; Left
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 14.7 x 13.6 x 5.6 inches
- Item Weight: 6.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22864824, 25937773
- Part Description: 2009 Chevrolet Equinox Knuckle
Vehicle Fitment- 2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
$279.96 MSRP:$463.36You Save: $183.40 (40%)
OEM (Genuine) 2009 Chevrolet Equinox Knuckle
PartNumber: 23337211
Product Specifications- Notes: 2 Wheel Drive, W/O Sport Susp
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 5.6 x 14.3 x 14.2 inches
- Item Weight: 6.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25918954, 22873265
- Part Description: 2009 Chevrolet Equinox Knuckle
Vehicle Fitment- 2009 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
OEM (Genuine) 2009 Chevrolet Equinox Steering Knuckle
PartNumber: 15837011
Product Specifications- Notes: Equinox, Torrent; Left
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 14.7 x 11.3 x 6.7 inches
- Item Weight: 5.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Equinox Steering Knuckle
Vehicle Fitment- 2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2009 Chevrolet Equinox Knuckle
PartNumber: 23337210
Product Specifications- Notes: 2 Wheel Drive, W/O Sport Susp
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 5.4 x 15.0 x 13.8 inches
- Item Weight: 6.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22873264, 25918953, 25982348
- Part Description: 2009 Chevrolet Equinox Knuckle
Vehicle Fitment- 2009 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
OEM (Genuine) 2009 Chevrolet Equinox Rear Suspension Knuckle Assembly
PartNumber: 23343506
Product Specifications- Notes: 2 Wheel Drive, W/Sport Susp; All Wheel Drive; Equinox, Torrent; Right
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 14.8 x 13.8 x 5.4 inches
- Item Weight: 6.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22864823, 25927799
- Part Description: 2009 Chevrolet Equinox Rear Suspension Knuckle Assembly
Vehicle Fitment- 2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2009 Chevrolet Equinox Knuckle Steering
PartNumber: 15837014
Product Specifications- Notes: Equinox, Torrent; Right
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 6.6 x 14.8 x 11.3 inches
- Item Weight: 6.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Equinox Knuckle Steering
Vehicle Fitment- 2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
FAQ for Steering Knuckle Repair
Q: What is the steering knuckle installation procedure?
A:
Make sure to position the steering knuckle to the strut assembly. Next, install the strut to the steering knuckle bolts and nuts. Install the ball stud nut. Next, install a new cotter pin, the outer tie rod end to the knuckle, install the nut and tighten to 65 Nm. Finally, install the wheel/bearing assembly and the tire/wheel.
By Bob
GM Specialist
02/11/2022Q: What is the knuckle replacement installation procedure?
A:
First, install the knuckle to the lower control arm and loosely install the bolt/nut. Next, install the upper control arm and loosely install the bolt/nut. Install the knuckle to the toe link and loosely install the bolt/nut. Finally, install the 3 trailing arm to knuckle bolts and loosely install the bolt/nut. Next, tighten the knuckle to the lower/upper control arm bolt and nut to 160 Nm. Next, tighten the knuckle-to-toe link bolt and nut to 160 Nm and the 3 trailing arm-to-knuckle bolts to 110 Nm.
By Bob
GM Specialist
02/11/2022