Part Description: 2009 Chevrolet Express 2500 Insulator, Front Stabilizer Shaft
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
FAQ for Sway Bar Bushing Repair
Q: How many stabilizer shaft bolts does Stabilizer Shaft Insulator have?
A:
The Stabilizer Shaft Insulator has a total of 4 stabilizer shaft bolts.
By Omar
GM Specialist
06/02/2022
Q: How many stabilizer shaft clamps does Stabilizer Shaft Insulator have?
A:
The Stabilizer Shaft Insulator has a total of 2 stabilizer shaft clamps.
By Bob
GM Specialist
06/02/2022
Q: What is the recommended torque for the stabilizer shaft insulator clamps nuts?
A:
The recommended torque is 46 Nm (34 lb-ft).
By Omar
GM Specialist
01/02/2022
Q: What should you know about the removal of stabilizer shaft insulator mounting nuts?
A:
You need to know that the stabilizer shaft insulator stud may come out of the frame during the removal.
By Omar
GM Specialist
26/01/2022
FAQ for Other Repair Info
Q: Can you disconnect the hydraulic brake hose from the brake caliper in the removal of the Rear Brake Caliper Bracket (With a Single Rear Wheel)?
A:
No, DO NOT disconnect the hydraulic brake hose from the Brake Caliper.
Q: Can you remove the snap ring from inside the top of the tube?
A:
No, you cannot remove the snap ring from inside the top of the tube, since gas-charged Shock Absorbers contain high-pressure gas.
Q: How do you install the Lower Control Arm Ball Joint?
A:
You need to install the new Ball Joint, 4 crimps, the lower control arm, and the tire and wheel.