< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Alternators, Batteries & Starters
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Negative Cable
PartNumber: 22846471
Product Specifications- Notes: Silverado, Sierra; 4.8L, 5.3L, 6.0L, 6.2L
- Other Names: Negative Cable
- Item Dimensions: 14.6 x 14.7 x 6.1 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25897054, 20835005, 20967455, 25848475, 15826905
- Part Description: 2009 Chevrolet Silverado 2500 HD Negative Cable
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$57.36 MSRP:$128.06You Save: $70.70 (56%)
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Positive Cable
PartNumber: 25814777
Product Specifications- Notes: W/O 6.6 Liter Diesel
- Other Names: Positive Cable
- Item Dimensions: 11.4 x 11.3 x 3.8 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15861605
- Part Description: 2009 Chevrolet Silverado 2500 HD Positive Cable
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
$70.09 MSRP:$132.27You Save: $62.18 (48%)
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Battery Cable
PartNumber: 20771932
Product Specifications- Notes: Jumper
- Other Names: Battery Cable
- Item Dimensions: 11.4 x 11.1 x 3.8 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25814778, 15252181, 25922061
- Part Description: 2009 Chevrolet Silverado 2500 HD Battery Cable
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$24.75 MSRP:$46.70You Save: $21.95 (48%)
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Positive Cable
PartNumber: 20774386
Product Specifications- Notes: Starter Solenoid, All
- Other Names: Battery Cable, Positive Cable
- Item Dimensions: 11.4 x 11.3 x 3.8 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25875321
- Part Description: 2009 Chevrolet Silverado 2500 HD Positive Cable
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$75.33 MSRP:$142.15You Save: $66.82 (48%)OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Negative Cable
PartNumber: 22846469
Product Specifications- Notes: 3/4 & 1 Ton, 6.0 Liter
- Other Names: Negative Cable
- Item Dimensions: 14.2 x 13.3 x 3.7 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15826906, 20905414, 25878311
- Part Description: 2009 Chevrolet Silverado 2500 HD Negative Cable
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$54.07 MSRP:$102.04You Save: $47.97 (48%)
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Negative Cable
PartNumber: 25876895
Product Specifications- Notes: 3/4 & 1 Ton, 6.6 Liter Diesel
- Other Names: Negative Cable
- Item Dimensions: 11.6 x 11.4 x 3.8 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15921160, 15240204
- Part Description: 2009 Chevrolet Silverado 2500 HD Negative Cable
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
$47.86 MSRP:$90.32You Save: $42.46 (48%)
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Positive Cable
PartNumber: 25862353
Product Specifications- Notes: W/6.6 Liter Diesel
- Other Names: Positive Cable
- Item Dimensions: 3.2 x 13.7 x 12.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Positive Cable
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
Deka® Positive Battery Cable for 2009 Chevrolet Silverado 2500 HD
PartNumber: 08865Product Specifications- Color: BLACK
- Gauge: 4
- Length: 7.5 IN
- Nominal OD: 0.354
- Terminal Type: TOP (UNIV)
- UPC: 083996088658
- Part Description: 2009 Chevrolet Silverado 2500 HD Positive Battery Cable
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | 8 Cyl 6.0L
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Positive Cable
PartNumber: 25886568
Product Specifications- Notes: Silverado, Sierra; 6.6L
- Item Dimensions: 5.6 x 18.4 x 18.6 inches
- Item Weight: 6.80 Pounds
- Replaced by: 20837883
- Part Description: 2009 Chevrolet Silverado 2500 HD Positive Cable
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
FAQ for Battery Cables Repair
Q: How do you replace the Battery Positive Cable (12V Battery to Auxiliary BEC)?
A:
You can disconnect the negative battery cable, reposition the positive battery cable insulating cover, rotate the lever lock counterclockwise, remove the positive battery cable terminal, the auxiliary bussed electrical center (BEC) cover, and the underhood junction block cover, lift the junction block retainers from the locked position, rotate the retainers to the open position, remove the junction block, remove the positive battery cable nut from the mega fuse stud and the auxiliary BEC stud, disconnect the positive battery cable connector and remove the positive battery cable assembly.
By Bob
GM Specialist
01/11/2022Q: How do you install the Battery Negative Cable?
A:
You can install the negative battery cable assembly, route the cable under the positive battery cable, raise the vehicle, position the negative battery cable lead behind the engine wiring harness ground lead, place the engine wiring harness ground lead and the negative battery cable lead to the frame, insert the anti-rotation tab on the engine harness ground lead into the hole in the frame, install the engine wiring harness ground lead to the frame bolt, lower the vehicle, position the engine wiring harness ground lead behind the negative battery cable lead, place the negative battery cable lead and the engine wiring harness ground lead against the engine block boss, install the negative battery cable ground terminal, install the negative battery cable clip, connect the engine wiring harness electrical connector and connect the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: How do you replace the Battery Negative Cable?
A:
You can disconnect the negative battery cable and the engine wiring harness electrical connector, remove the negative battery cable clip, remove the negative battery cable ground terminal bolt, remove the negative battery cable and the engine wiring harness ground leads, raise the vehicle, remove the engine wiring harness ground lead bolt, remove the engine wiring harness ground lead and the negative battery cable lead, lower the vehicle and remove the negative battery cable assembly.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the positive battery cable nut to the mega fuse stud?
A:
You can tighten the nut to 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the first step for replacing the Auxiliary Battery Positive Cable?
A:
The first step is to disconnect the auxiliary battery negative cable.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the generator battery jumper cable nut to the mega fuse holder?
A:
You can tighten the nut to 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you install the Auxiliary Battery Positive Cable?
A:
You can install the auxiliary battery positive cable, the auxiliary battery positive cable terminal, and the auxiliary battery positive cable nut, position the auxiliary battery positive cable boot, install the auxiliary battery positive cable to the battery positive post, tighten the auxiliary battery positive cable nut, install the auxiliary battery positive cable terminal to the underhood junction block stud, install the auxiliary battery positive cable nut to the underhood junction block stud, install the auxiliary battery positive cable clips, close the auxiliary battery positive cable post cover, install the underhood junction block cover and connect the auxiliary battery.
By Bob
GM Specialist
01/11/2022Q: How do you replace the Auxiliary Battery Positive Cable?
A:
You can disconnect the auxiliary battery, remove the underhood junction block cover, open the auxiliary battery positive cable post cover, loosen the auxiliary battery positive cable nut, remove the auxiliary battery positive cable, the auxiliary battery positive cable nut, and the auxiliary battery positive cable terminal, reposition the auxiliary battery positive cable boot, remove the auxiliary battery positive cable nut from the rely on the stud, remove the auxiliary battery positive cable terminal from the relay stud, remove the auxiliary battery positive cable clips and remove the cable.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Auxiliary Battery Negative Cable?
A:
You can install the auxiliary battery negative cable, position the auxiliary battery negative cable ground terminal to the left cylinder head, install the bolt and connect the auxiliary battery negative cable.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the auxiliary battery positive cable and nut to the battery relay?
A:
You can tighten the nut to 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (8)