< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Crankshafts, Pistons, Rings & Connecting Rods
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Seal, Engine Front Cover
PartNumber: 12585673
Product Specifications- Notes: 4.8, 5.3, 6.0 & 6.2 Liter; Silverado, Sierra
- Item Dimensions: 3.5 x 3.5 x 0.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12550565, 12561244
- Part Description: 2009 Chevrolet Silverado 2500 HD Seal, Engine Front Cover
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, High Country, LS, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$22.54 MSRP:$44.74You Save: $22.20 (50%)
Victor Reinz® Rear Improved Design Crankshaft Seal for 2009 Chevrolet Silverado 2500 HD
PartNumber: 19-10080-01Product Specifications- Notes: 1 Piece;Premium, Improved Design; PTFE Rubber; Rear
- Material: PTFE Rubber
- Part Description: 2009 Chevrolet Silverado 2500 HD Rear Improved Design Crankshaft Seal
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | 8 Cyl 6.0L
$24.65
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Crankshaft Seal
PartNumber: 89060436
Product Specifications- Notes: Silverado, Sierra
- Other Names: Crankshaft Seal, Rear Main Seal
- Item Dimensions: 5.2 x 5.1 x 1.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12585671, 89018162, 12550574
- Part Description: 2009 Chevrolet Silverado 2500 HD Crankshaft Seal
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$21.94 MSRP:$34.84You Save: $12.90 (38%)
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Rear Main Seal
PartNumber: 97209342
Product Specifications- Notes: Sierra, Silverado
- Other Names: Rear Main Seal
- Item Dimensions: 6.3 x 6.3 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Rear Main Seal
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, Custom, High Country, LS, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
$44.70 MSRP:$73.99You Save: $29.29 (40%)
SKF® Rear Crankshaft Seal for 2009 Chevrolet Silverado 2500 HD
PartNumber: 38617Product Specifications- Quantity Per Application: 1
- UPC: 085311492904
- Part Description: 2009 Chevrolet Silverado 2500 HD Rear Crankshaft Seal
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | 8 Cyl 6.0L
$26.81
FAQ for Crankshaft Seal Repair
Q: What is the recommended torque when you tighten the oil pan-to-rear housing bolts?
A:
You can tighten the oil pan-to-rear housing bolts to 12 Nm (106 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you replace the Crankshaft Front Oil Seal (Except LMG, LY2, and LY5)?
A:
You can remove the crankshaft balancer and remove the crankshaft front oil seal from the front cover.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the Crankshaft Rear Oil Seal Housing?
A:
The procedure is to remove the automatic transmission flexplate, the oil pan-to-rear oil seal housing bolts, the rear oil seal housing bolts, the rear oil seal housing and gasket, discard the gasket and remove and discard the rear oil seal.
By Bob
GM Specialist
29/10/2022Q: How do you install the Crankshaft Front Oil Seal (Except LMG, LY2, and LY5)?
A:
You can lubricate the outer edge of the oil seal and the front cover oil seal bore with clean engine oil, install the crankshaft front oil seal, install the J 41478 threaded rod (with nut, washer, guide, and oil seal), install the oil seal and install the crankshaft balancer.
By Bob
GM Specialist
29/10/2022Q: How do you install the Crankshaft Rear Oil Seal Housing?
A:
You can apply a 5 mm (0.2 in) bead of sealant, and 20 mm (0.8 in) to the 2 joints at the rear of the block/pan and inspect the rear oil gallery plug for proper installation.
By Bob
GM Specialist
29/10/2022Q: What tool can you use to install the oil seal into the cover bore?
A:
You can use the J 41478.
By Bob
GM Specialist
29/10/2022See more FAQs (1)