< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Manifold
PartNumber: 12597600
Product Specifications- Notes: Silverado, Sierra; 6.0L
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 29.5 x 19.2 x 13.3 inches
- Item Weight: 17.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Manifold
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$176.82 MSRP:$292.66You Save: $115.84 (40%)
Dorman® Aluminum Intake Manifold for 2009 Chevrolet Silverado 2500 HD
PartNumber: 615-621Product Specifications- Air Conditioning Compressor Mount: No
- Alternator Mount: No
- Center Maximum Height: 5"
- Color: Aluminum
- EGR Ready: No
- Front Maximum Height: 9"
- Gasket or Seal Included: No
- Grade Type: Regular
- Heated Choke Port: No
- Height: 9"
- High-Riser: No
- Intake Manifold Material: Aluminum
- Length: 9"
- Manifold Height: 9"
- Material: Aluminum
- Mount Hole Diameter: 0.26"
- Mounting Holes: 2
- OE Part Number: 97363568, 12628282
- Port Outlet Dimensions: 2.36"
- Port Quantity: 1
- Rear Maximum Height: 2"
- UPC: 889245130976
- Width: 5"
- Part Description: 2009 Chevrolet Silverado 2500 HD Aluminum Intake Manifold
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | 8 Cyl 6.6L
$122.74
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Manifold
PartNumber: 97363572
Product Specifications- Notes: Silverado, Sierra; 6.6L; Right
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 33.0 x 5.9 x 5.6 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Manifold
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LS, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
$86.04 MSRP:$136.61You Save: $50.57 (38%)
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Manifold
PartNumber: 97363571
Product Specifications- Notes: Silverado, Sierra; 6.6L; Left
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 32.1 x 5.8 x 5.6 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Manifold
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LS, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
$89.27 MSRP:$141.75You Save: $52.48 (38%)
FAQ for Intake Manifold Repair
Q: How do you install the Upper Intake Manifold Cover?
A:
You can install the upper intake manifold cover, install the upper intake manifold cover nut, install the brake booster vacuum hose to the intake manifold nipple, position the brake booster vacuum hose clamp at the intake manifold and install the intake manifold.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the fuel rail bolts?
A:
You can tighten the bolts to 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the first step for replacing the intake manifold (LH6, LMG, LY5, and L76)?
A:
The first step is to remove the air cleaner outlet duct.
By Bob
GM Specialist
01/11/2022Q: How do you install the Engine Block Valley Cover?
A:
You can apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the threads of the oil pressure sensor, install a new washer and the oil pressure sensor, lubricate the O-ring seals with clean engine oil, install the O-ring seals, set the engine valley cover onto the engine, install the engine valley cover bolts and install the intake manifold.
By Bob
GM Specialist
01/11/2022Q: How do you replace the Upper Intake Manifold Sight Shield?
A:
You can open the hood, grasp the front of the intake manifold sight shield, disengage the grommets from the studs, remove the intake manifold sight shield and remove the intake manifold sight shield retainer bolts and retainer.
By Bob
GM Specialist
01/11/2022Q: What is the first step for replacing the Intake Manifold (LY2 and LY6)?
A:
The first step is to remove the air cleaner outlet duct.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the engine harness retainer nut?
A:
You can tighten the nut to 5 Nm (44 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Upper Intake Manifold Cover?
A:
The procedure is to remove the intake manifold, reposition the brake booster vacuum hose clamp at the intake manifold, remove the brake booster vacuum hose, remove the upper intake manifold cover nut and remove the upper intake manifold cover.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Upper Intake Manifold Sight Shield?
A:
You can position the intake manifold sight shield on top of the intake manifold, install the intake manifold sight shield retainer bolts, install the intake manifold sight shield tabs, align the intake manifold sight shield grommets with the studs, push down on the intake manifold sight shield over the grommets and close the hood.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the throttle body bolts/nuts?
A:
You can tighten the bolts/nuts to 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (6)