< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Seat Back Heater
PartNumber: 20792749
Product Specifications- Notes: Bucket Seat, Passenger Seat, W/Power Lumbar, Seat Back; Bucket Seat, Driver Seat, W/Power Lumbar, Seat Back; Silverado, Sierra; Seat Back
- Item Dimensions: 11.8 x 4.9 x 5.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25911156, 15232560
- Part Description: 2009 Chevrolet Silverado 2500 HD Seat Back Heater
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$66.32 MSRP:$100.04You Save: $33.72 (34%)
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Heater Asm-Driver Seat Cushion
PartNumber: 20792748
Product Specifications- Notes: Bucket Seat, Passenger Seat, W/Power Lumbar, Seat Bottom; Bucket Seat, Driver Seat, W/Power Lumbar, Seat Bottom; Silverado, Sierra; Seat Cushion
- Other Names: Element, Heater Element, Seat Cushion Heater
- Item Dimensions: 12.8 x 12.5 x 3.7 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15232559
- Part Description: 2009 Chevrolet Silverado 2500 HD Heater Asm-Driver Seat Cushion
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$71.15 MSRP:$107.34You Save: $36.19 (34%)
FAQ for Seat Heater Pad Repair
Q: What may be the cause of intermittent conditions?
A:
Faulty electrical connections or wiring may be the cause of intermittent conditions.
By Bob
GM Specialist
01/11/2022Q: What is the purpose of reviewing the system operation?
A:
The purpose is to familiarize yourself with the system's functions.
By Bob
GM Specialist
01/11/2022Q: What tools can be used to push the tabs on the side of the panel?
A:
You can use a nylon flat-bladed tool to push the tabs in on the side of the panel.
By Bob
GM Specialist
01/11/2022Q: What must you do to reset the CCSM?
A:
You must cycle the ignition OFF and then ON between each test to reset the CCSM.
By Bob
GM Specialist
01/11/2022Q: What should you do if the test lamp is always ON?
A:
You should test the appropriate control circuit for a short to voltage.
By Bob
GM Specialist
01/11/2022Q: What should you perform before using the Symptom Tables?
A:
You should perform the Diagnostic System Check-Vehicle before using the Symptom Tables.
By Bob
GM Specialist
01/11/2022Q: What should you do if the test lamp does not illuminate?
A:
You should test the appropriate control circuit for a short to ground or open/high resistance.
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Driver or Passenger Seat Cushion Ventilation Heating and Cooling Blower (Denali with KB6)?
A:
You should remove the front seat.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the seat cushion blower nuts?
A:
You can tighten the nuts to 3 Nm (25 lb in).
By Bob
GM Specialist
01/11/2022Q: What tools can be used to warm or cool the TED while measuring the resistance?
A:
You can use a heat gun or a blower to warm or cool the TED while measuring the resistance.
By Bob
GM Specialist
01/11/2022See more FAQs (17)