< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Steering Arms, Links & Rods
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Rod Kit, Steering Linkage Outer Tie
PartNumber: 15254061
Product Specifications- Notes: Silverado, Sierra
- Other Names: Outer Tie Rod
- Item Dimensions: 6.1 x 5.7 x 5.1 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Rod Kit, Steering Linkage Outer Tie
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$102.60 MSRP:$178.59You Save: $75.99 (43%)
Delphi® Front Inner Steering Tie Rod End for 2009 Chevrolet Silverado 2500 HD
PartNumber: TA2193Product Specifications- End 1 Gender: Male
- Height: 50.00
- Item Grade: Standard Replacement
- Length: 310.00
- UPC: 689604277843
- Width: 50.00
- Part Description: 2009 Chevrolet Silverado 2500 HD Front Inner Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | All Engines
$28.50
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Outer Tie Rod
PartNumber: 19352244
Product Specifications- Notes: 3/4 & 1 Ton; Silverado, Sierra
- Location: Driver Side; Passenger Side
- Other Names: Outer Tie Rod
- Item Dimensions: 5.9 x 2.8 x 10.7 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19303461, 12471649, 15891515
- Replaced by: 86511721
- Part Description: 2009 Chevrolet Silverado 2500 HD Outer Tie Rod
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$89.53 MSRP:$148.19You Save: $58.66 (40%)
Delphi® Front Outer Steering Tie Rod End for 2009 Chevrolet Silverado 2500 HD
PartNumber: TA2405Product Specifications- Notes: Aftermarket Design
- End 1 Gender: Female
- UPC: 689604248058
- Part Description: 2009 Chevrolet Silverado 2500 HD Front Outer Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | All Engines
$15.09
Centric® Premium™ Front Outer Steering Tie Rod End for 2009 Chevrolet Silverado 2500 HD
PartNumber: 612.66105Product Specifications- UPC: 805890805557
- Part Description: 2009 Chevrolet Silverado 2500 HD Premium™ Front Outer Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | All Engines
$31.79
Centric® Premium™ Front Inner Steering Tie Rod End for 2009 Chevrolet Silverado 2500 HD
PartNumber: 612.66108Product Specifications- UPC: 805890805588
- Part Description: 2009 Chevrolet Silverado 2500 HD Premium™ Front Inner Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | All Engines
$23.50
FAQ for Tie Rod End Repair
Q: What is the removal procedure for the Steering Linkage Inner Tie Rod (Hydraulic Power Steering)?
A:
The procedure is to remove the steering gear boot, place a pipe wrench on the steering gear rack next to the steering linkage inner tie rod housing, place a wrench on the flats of the steering linkage inner tie rod housing and rotate the steering linkage inner tie rod housing counterclockwise.
By Bob
GM Specialist
01/11/2022Q: How do you install the Steering Linkage Inner Tie Rod (Hydraulic Power Steering)?
A:
You can apply LOCTITE(R) 262 or equivalent to the steering gear inner tie rod threads, attach the steering linkage inner tie rod onto the steering gear rack, place a pipe wrench on the steering gear rack next to the steering linkage inner tie rod housing, tighten the steering linkage inner tie rod housing and install the steering gear boot.
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the steering linkage outer tie rod?
A:
You should remove the front tire/wheel.
By Bob
GM Specialist
01/11/2022Q: What tool can be used to separate the steering linkage outer tie rod from the steering knuckle?
A:
You can use puller J 24319 - B to separate the steering linkage outer tie rod from the steering knuckle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the steering linkage outer tie rod nut?
A:
You can tighten the nut to 60 Nm (44 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you install the Steering Linkage Inner Tie Rod?
A:
You can remove all traces of oil, grease, or other contaminants, clean the threads of the steering linkage inner tie rod, and apply red LOCTITE(TM) thread locker, GM P/N 12345493 (Canadian P/N 10953488) to the threads of the steering linkage inner tie rod, install the steering linkage inner tie rod, install the steering linkage outer tie rod, install the engine shield and adjust the front toe.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Steering Linkage Inner Tie Rod?
A:
The procedure is to remove the engine shield, the steering linkage outer tie rod, and the steering linkage inner tie rod.
By Bob
GM Specialist
01/11/2022See more FAQs (2)