2009 Chevrolet Silverado 3500 HD Control Arm

You should install the upper control arm, the upper control arm bolts, the new nut to the upper ball joint stud, the retaining bolts, and the tire and wheel.

You should remove the tire and wheel, the stabilizer shaft links, the torsion bars, the shock absorber module, the wheel drive shafts, the lower ball joint retaining nut, the lower control arm nuts, the control arm bolts, and the control arm.

The recommended torque is 190 N.m (140 lb-ft).

You should install the lower control arm, the lower control arm bolts, the washers, the lower control arm retaining nuts, and the lower ball joint in the steering knuckle.

You should remove the tire and wheel, the retaining bolt for the brake hose and the wheel speed sensor brackets, the nut at the upper ball joint, the upper control arm nuts and the adjustment cams, and the upper control arm.