< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 3500 HD
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Brands
- Prices
Dorman® OE Solutions Diesel Oil Cooler for 2009 Chevrolet Silverado 3500 HD
PartNumber: 918-400Product Specifications- Color or Finish: Silver
- Cooler Inlet Size: 0.72"
- Cooler Outlet Size: 0.72"
- Cooling Row Quantity: 11
- Core Tube Width: 0.155"
- Depth: 2.35"
- Diameter (in): 0.72"
- Finish: Brushed Metal
- Height: 3.281"
- Inlet Fitting Type: Female
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Material: Aluminum
- OE Part Number: 12649227, 19210615
- Outlet Fitting Type: Female
- Thickness (in): 3.096"
- UPC: 019495387121
- Width (in): 3.096"
- Part Description: 2009 Chevrolet Silverado 3500 HD OE Solutions Diesel Oil Cooler
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | All Trims | 8 Cyl 6.6L
$223.29
OEM (Genuine) 2009 Chevrolet Silverado 3500 HD Cooler Asm, Engine Oil
PartNumber: 19210615
Product Specifications- Notes: 6.6 Liter Diesel
- Other Names: Oil Cooler
- Item Dimensions: 10.8 x 10.4 x 8.2 inches
- Item Weight: 13.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 97329038, 97351829, 97262115
- Part Description: 2009 Chevrolet Silverado 3500 HD Cooler Asm, Engine Oil
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
Cardone Reman® Remanufactured Oil Cooler for 2009 Chevrolet Silverado 3500 HD
PartNumber: 2P-101Product Specifications- Color: Silver
- Cooler Inlet OD Size: 0.725"
- Cooler Outlet OD Size: 0.725"
- Cooling Row Quantity: 11
- E-Waste: No
- Inlet Attachment Type: Gasket
- Installation Hardware Included: Yes
- Material: Aluminum
- Outlet Attachment Type: Gasket
- Package Contents: Engine Oil Cooler, Gaskets, O-Rings, Instruction Sheet
- Product Condition: Remanufactured
- UPC: 884548143500
- Part Description: 2009 Chevrolet Silverado 3500 HD Remanufactured Oil Cooler
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | All Trims | 8 Cyl 6.6L
FAQ for Engine Oil Cooler Repair
Q: How to service the Engine Oil Cooler Connector?
A:
You should remove the plastic caps from the quick-connect fittings by pulling the caps back along the pipe before installation.
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Oil Cooler Hose/Pipe Quick-Connect Fitting?
A:
You should install the EOC pipe into the EOC pipe fitting and give the cooler pipe a gentle pull.
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Oil Cooler Pipe/Hose Quick Connect Fitting?
A:
You should disengage the plastic caps from the quick connect fittings, pull on one of the open ends of the retaining ring, rotate the retaining ring around the quick connector, remove the engine oil cooler line from the quick connector fitting at the radiator and then clean all of the components in a suitable solvent, and dry them with compressed air.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Engine Oil Cooler Fitting?
A:
The recommended torque is 24 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Oil Cooler Hose/Pipe?
A:
You should remove the oil cooler hoses from the clip, the engine protection shield, the differential carrier right side nuts, the differential carrier left side bolts, the differential carrier right side nuts, the differential carrier upper mounting bolt and nut and the differential carrier lower mounting bolt and nut.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Engine Oil Cooler Connector?
A:
You should drain the cooling system, remove the engine oil cooler pipe from the oil cooler fittings on the radiator and then not remove the upper and lower engine oil cooler fittings from the radiator.
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Oil Cooler (EOC) Hose/Pipe Quick-Connect Fitting?
A:
You should remove the plastic caps from the quick-connect fittings and the DT-47731 or the J 28585 from the EOC pipe.
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Oil Cooler Hose/Pipe?
A:
You should install the oil cooler hose assembly, the oil cooler hose adapter bolts, the oil cooler hose bracket bolt, the differential carrier left side upper bolt and nut, the differential carrier left side lower bolt and nut, the differential carrier right side nuts, the differential carrier right side nut, the differential carrier left side bolts, the engine protection shield, the oil cooler hoses to the clip and the oil cooler lines to the radiator.
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Oil Cooler Pipe/Hose Quick Connect Fitting?
A:
You should install a new retaining ring into each quick connector fitting, rotate the retaining ring around the connector, ensure the 3 retaining ring ears can be seen from the inside of the connector and the retaining ring can move freely in the slots, install the engine oil cooler line into the quick connector fitting, snap the plastic cap onto the quick connect fitting, ensure that the plastic cap is fully seated against the fitting, ensure that no gap is present between the cap and the fitting and then inspect and fill the engine oil to the proper level.
By Bob
GM Specialist
01/11/2022See more FAQs (4)