< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 3500 HD
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 3500 HD Manifold
PartNumber: 12597600
Product Specifications- Notes: Silverado, Sierra; 6.0L
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 29.5 x 19.2 x 13.3 inches
- Item Weight: 17.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 3500 HD Manifold
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$176.82 MSRP:$292.66You Save: $115.84 (40%)
Dorman® Aluminum Intake Manifold for 2009 Chevrolet Silverado 3500 HD
PartNumber: 615-621Product Specifications- Air Conditioning Compressor Mount: No
- Alternator Mount: No
- Center Maximum Height: 5"
- Color: Aluminum
- EGR Ready: No
- Front Maximum Height: 9"
- Gasket or Seal Included: No
- Grade Type: Regular
- Heated Choke Port: No
- Height: 9"
- High-Riser: No
- Intake Manifold Material: Aluminum
- Length: 9"
- Manifold Height: 9"
- Material: Aluminum
- Mount Hole Diameter: 0.26"
- Mounting Holes: 2
- OE Part Number: 97363568, 12628282
- Port Outlet Dimensions: 2.36"
- Port Quantity: 1
- Rear Maximum Height: 2"
- UPC: 889245130976
- Width: 5"
- Part Description: 2009 Chevrolet Silverado 3500 HD Aluminum Intake Manifold
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | All Trims | 8 Cyl 6.6L
$122.74
OEM (Genuine) 2009 Chevrolet Silverado 3500 HD Manifold
PartNumber: 97363572
Product Specifications- Notes: Silverado, Sierra; 6.6L; Right
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 33.0 x 5.9 x 5.6 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 3500 HD Manifold
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
$86.04 MSRP:$136.61You Save: $50.57 (38%)
OEM (Genuine) 2009 Chevrolet Silverado 3500 HD Manifold
PartNumber: 97363571
Product Specifications- Notes: Silverado, Sierra; 6.6L; Left
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 32.1 x 5.8 x 5.6 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 3500 HD Manifold
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
$89.27 MSRP:$141.75You Save: $52.48 (38%)
FAQ for Intake Manifold Repair
Q: What is the recommended torque for the intake manifold bolts/nuts?
A:
The recommended torque is 21 N.m (15 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Intake Manifold Tube?
A:
You should install new O-ring seals onto the tube, the intake manifold tube, the air inlet tube, new gaskets, the air inlet tube nuts and bolt, and the engine harness clip to the air inlet tube.
By Bob
GM Specialist
01/11/2022Q: How to install the Center Intake Manifold?
A:
You should install new center intake manifold gaskets, the center intake manifold, the center intake manifold bolts/nuts, the IAT sensor, and the turbocharger.
By Bob
GM Specialist
01/11/2022Q: How to remove the Intake Manifold Cover?
A:
You should loosen the intake manifold cover clamp. Loosen the intake manifold cover bolt and then remove the intake manifold cover.
By Bob
GM Specialist
01/11/2022Q: How to install the Intake Manifold?
A:
You should install the intake manifold, the intake manifold bolts/nuts, the left fuel rail, the glow plug module and bracket, and the center intake manifold.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the intake manifold cover clamp?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Intake Manifold Cover?
A:
You should install the intake manifold cover, tighten the intake manifold cover bolt and then tighten the intake manifold cover clamp.
By Bob
GM Specialist
01/11/2022Q: How to remove the Center Intake Manifold?
A:
You should remove the exhaust gas recirculation (EGR) valve cooler tube, the water outlet tube, the intake manifold tube, the 2 intake manifold tube gaskets, the turbocharger, the intake air temperature (IAT) sensor, the center intake manifold bolts/nuts, and the gaskets.
By Bob
GM Specialist
01/11/2022Q: How to remove the Intake Manifold?
A:
You should remove the center intake manifold, the glow plug module and bracket, the left fuel rail, the intake manifold bolts/nuts, and the intake manifold.
By Bob
GM Specialist
01/11/2022See more FAQs (4)