< Back ×
2009 Chevrolet Silverado 3500 HD Tailgate Handle
My Vehicle Change Vehicle
2009 Chevrolet Silverado 3500 HD
< Back to View All
Trunks & Tailgates
- Department
- Prices
$56.25 MSRP:$88.48You Save: $32.23 (37%)Product Specifications- Notes: 5.9 Ft Box, W/O Lock Control; 6.5 Ft Box, W/O Lock Control; 8 Ft Box, W/O Lock Control
- Other Names: Handle
- Item Dimensions: 8.1 x 5.3 x 5.4 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20880357, 15140549
- Part Description: 2009 Chevrolet Silverado 3500 HD Handle
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$50.00 MSRP:$78.65You Save: $28.65 (37%)Product Specifications- Notes: 5.9 Ft Box, W/Lock Control; 6.5 Ft Box, W/Lock Control; 8 Ft Box, W/Lock Control
- Other Names: Handle, Lock
- Item Dimensions: 7.9 x 5.4 x 5.4 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25918361, 20880358, 25775280
- Part Description: 2009 Chevrolet Silverado 3500 HD Lock
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Tailgate Handle Repair
Q: What is the recommended torque for the Pickup Box Endgate Striker nuts?
A:
The recommended torque is 35 N.m (25 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How many bolts attach to the Endgate Lower Hinge (Body Side)?
A:
There are 4 bolts attaching the Endgate Lower Hinge (Body Side).
By Bob
GM Specialist
02/11/2022Q: How many bolts attach to the Endgate Latch?
A:
There are 2 bolts attaching the Endgate Latch.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the Endgate Lower Hinge (Body Side) bolts?
A:
The recommended torque is 40 N.m (30 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the Endgate Latch?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to service the Endgate Latch?
A:
You should support the pickup box endgate, release the endgate cable from the endgate cable bolt, disconnect the latch rod from the latch handle and then remove the endgate latch and transfer the endgate cable.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the torque rod retainer bolts?
A:
The recommended torque is 12 N.m (106 lb in).
By Bob
GM Specialist
02/11/2022Q: How many bolts attach to the Pickup Box Endgate Latch Handle?
A:
There are 3 bolts attaching the Pickup Box Endgate Latch Handle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Pickup Box Endgate Latch Handle bolt?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be noted for the Pickup Box Endgate Linkage?
A:
You should release the rod from the pickup box endgate handle and pull the rod through the endgate latch opening.
By Bob
GM Specialist
01/11/2022See more FAQs (6)