< Back ×
2009 Chevrolet Suburban 1500 Air Bag Sensor
My Vehicle Change Vehicle
2009 Chevrolet Suburban 1500
< Back to View All
Air Bag
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Suburban 1500 Side Sensor
PartNumber: 15093923$210.98 MSRP:$331.82You Save: $120.84 (37%)Product Specifications- Notes: Front
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Suburban 1500 Side Sensor
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2009 Chevrolet Suburban 1500 Side Sensor
PartNumber: 10381278$224.04 MSRP:$338.00You Save: $113.96 (34%)Product Specifications- Notes: Rear
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.1 x 2.0 x 2.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Suburban 1500 Side Sensor
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2009 Chevrolet Suburban 1500 Side Sensor
PartNumber: 20926385$173.95 MSRP:$273.57You Save: $99.62 (37%)Product Specifications- Notes: Escalade Esv; All; 2nd Design;Yukon Xl, Suburban; All; 2nd Design
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 4.2 x 2.3 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25794812
- Part Description: 2009 Chevrolet Suburban 1500 Side Sensor
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LT, LTZ | 8 Cyl 6.0 L GAS
Product Specifications- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85098081
- Part Description: 2009 Chevrolet Suburban 1500 Front Sensor
Product Specifications- Notes: Stamped 25794815
- Connector Gender: Female
- Connector/Terminal Configuration: 2 Pin
- OE Part Number: 20926379, 2096379, 25794815
- Package Quantity: 1
- UPC: 019495423782
- Part Description: 2009 Chevrolet Suburban 1500 OE Solutions Air Bag Impact Sensor
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | All Trims | All Engines
FAQ for Air Bag Sensor Repair
Q: What should be noticed when replacing the Side Object Sensor Bracket?
A:
You should disconnect the electrical connectors.
By Bob
GM Specialist
01/11/2022Q: What are the preliminary procedures for Side Object Sensor Bracket replacement?
A:
You should raise the Vehicle and remove the bumper fascia.
By Bob
GM Specialist
01/11/2022Q: What should be noted when serving Roof Side Rail Inflatable Restraint Module (Front Left, Extended Wheelbase)?
A:
To prevent SIR deployment, personal injury, or unnecessary SIR system repairs, you can not strike the door or the door pillar in the area of the side impact sensor (SIS). You should turn OFF the ignition and remove the key when performing service in the area of the SIS.
By Bob
GM Specialist
01/11/2022Q: What are the preliminary procedures for Side Object Sensor replacement?
A:
You should raise the vehicle.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Side Object Sensor?
A:
You should unsnap the side sensor out of the side sensor bracket.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when installing the Side Object Sensor Bracket Nuts?
A:
The recommended torque is 6 Nm (53 lb in).
By Bob
GM Specialist
01/11/2022Q: What are the preliminary procedures for Roof Side Rail Inflatable Restraint Module replacement (Front Left, Extended Wheelbase)?
A:
You should disable the supplemental inflatable restraint (SIR) system, remove windshield garnish molding, remove the upper center pillar trim panel, remove body lock pillar garnish molding, remove the roof rail rear assist handle, and remove coat hooks and lower side of the headliner.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Side Object Sensor Push Pins?
A:
You should disconnect the electrical connector and use a flat tool to pry out push pins.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when installing the Side Object Sensor Bolt?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What are the preliminary procedures for Inflatable Restraint Vehicle Rollover Sensor Replacement?
A:
You should disable the supplemental inflatable restraint (SIR) system, remove the front center floor console bezel assembly if equipped and remove the center seat if equipped.
By Bob
GM Specialist
01/11/2022See more FAQs (11)