< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Suburban 1500
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Suburban 1500 Thermostat Unit
PartNumber: 12587395
Product Specifications- Notes: Escalade Esv;Yukon Xl, Suburban
- Item Dimensions: 4.0 x 4.2 x 4.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Suburban 1500 Thermostat Unit
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$9.00 MSRP:$16.28You Save: $7.28 (45%)
Gates® Engine Coolant Water Outlet for 2009 Chevrolet Suburban 1500
PartNumber: CO34829Product Specifications- Notes: Thermostat Cover
- By-Pass Holes: No
- Material: Cast Aluminum
- Number of Bolt Holes: 2
- Number of Gaskets: 0
- Number of Seals: 0
- OE Exact: Yes
- Outlet Inside Diameter 1: 1.177"
- Outlet Outside Diameter 1: 1.548"
- Type: Coolant Outlet
- UPC: 770075733751
- Part Description: 2009 Chevrolet Suburban 1500 Engine Coolant Water Outlet
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | All Trims | 8 Cyl 6.0L
- 2009 Chevrolet Suburban 1500 | All Trims | 8 Cyl 5.3L
$13.32
Four Seasons® Engine Coolant Water Outlet W O Thermostat for 2009 Chevrolet Suburban 1500
PartNumber: 85945Product Specifications- Notes: Outlet
- Gasket or Seal Included: Not Included
- Inlet Dia. IN: 1.205
- Material: Aluminum
- Maximum Height: 2.425
- Meets / Exceeds OEM: Yes
- Mnt Flange Width IN: .378
- Style: w/o Thermostat
- Thermostat Included: Not Included
- UPC: 096361859456
- Part Description: 2009 Chevrolet Suburban 1500 Engine Coolant Water Outlet W O Thermostat
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | All Trims | All Engines
$9.15
FAQ for Thermostat Housing Repair
Q: How do I install the Engine Coolant Thermostat Housing (LY2, LH6, LY5, LMG, LY6)?
A:
You should install the water pump inlet seal to the water pump inlet, position the water pump inlet to the water pump, install the water pump inlet bolts, install the radiator outlet hose to the water pump inlet, position the radiator outlet hose clamp at the water pump inlet, install the air cleaner outlet duct and fill the cooling system.
By Bob
GM Specialist
01/11/2022Q: How do I remove the Engine Coolant Thermostat Housing (LY2, LH6, LY5, LMG, LY6)?
A:
You should drain the cooling system, remove the air cleaner outlet duct, reposition the radiator outlet hose clamp at the water pump inlet, remove the radiator outlet hose from the water pump inlet, remove the water pump inlet bolt, remove the water pump inlet from the water pump and remove and discard the water pump inlet seal.
By Bob
GM Specialist
01/11/2022