< Back ×
2009 Chevrolet Tahoe 4WD Actuator
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Switch Actuator
PartNumber: 26060073$153.56 MSRP:$254.16You Save: $100.60 (40%)Product Specifications- Notes: 4WD; Tahoe, Yukon, Escalade
- Other Names: Actuator, Switch, Switch Actuator
- Item Dimensions: 8.3 x 3.2 x 3.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Switch Actuator
Vehicle Fitment- 2009 Chevrolet Tahoe | Base, Hybrid, Limited, LS, LT, LTZ, PPV, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS, 8 Cyl 6.5 L DIESEL
Product Specifications- Housing Material: Plastic
- OE Part Number: 26060073, 8-26060-073-0
- Package Contents: 4wd Actuator Assembly
- Terminal Quantity: 5
- Terminal Type: Blade
- UPC: 019495058922
- Wiring Harness Included: No
- Part Description: 2009 Chevrolet Tahoe OE Solutions 4Wd Actuator
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
FAQ for 4Wd Actuator Repair
Q: How do you remove the Front Drive Axle Actuator?
A:
You need to remove the front differential carrier shield, disconnect the electrical connector from the actuator and remove the actuator for the 8.25-inch axle or the 9.5-inch axle by turning the actuator counterclockwise.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Two/Four Wheel Drive Actuator Position Sensor O-ring Seal?
A:
You need to lightly lubricate the O-ring with clean DEXRON(R)VI.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Two/Four Wheel Drive Actuator bolts?
A:
The recommended torque is 18 Nm (13 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the actuator?
A:
The recommended torque is 20 Nm (15 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Two/Four Wheel Drive Actuator have?
A:
It has a total of 4 bolts.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Two/Four Wheel Drive Actuator Position Sensor bolt?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
01/11/2022Q: How do I replace the Two/Four Wheel Drive Actuator Seal?
A:
You need to use J 45278 and J23907 to remove the seal from the actuator and use the J44907 to install the seal to the actuator.
By Bob
GM Specialist
01/11/2022Q: How do you install the Front Drive Axle Actuator?
A:
You need to apply a sealant to the threads of the actuator for the 8.25-inch axle or the 9.25-inch axle, use the correct sealant, install the actuator, connect the electrical connector to the actuator and install the front differential carrier shield.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Two/Four Wheel Drive Actuator Position Sensor have?
A:
It has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022See more FAQs (4)