< Back ×
2009 Chevrolet Tahoe Air Bag Sensor
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Air Bag
- Department
- Brands
- Prices
$182.26 MSRP:$274.97You Save: $92.71 (34%)Product Specifications- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85098081
- Part Description: 2009 Chevrolet Tahoe Front Sensor
$224.04 MSRP:$338.00You Save: $113.96 (34%)Product Specifications- Notes: Rear
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.1 x 2.0 x 2.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Side Sensor
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$210.98 MSRP:$331.82You Save: $120.84 (37%)Product Specifications- Notes: Front
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Side Sensor
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$173.95 MSRP:$273.57You Save: $99.62 (37%)Product Specifications- Notes: Tahoe, Yukon, Escalade; All;Tahoe, Yukon, Escalade; All; 2nd Design; Rear; Front
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 4.2 x 2.3 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25794812
- Part Description: 2009 Chevrolet Tahoe Side Sensor
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX
Product Specifications- Notes: Stamped 25794815
- Connector Gender: Female
- Connector/Terminal Configuration: 2 Pin
- OE Part Number: 20926379, 2096379, 25794815
- Package Quantity: 1
- UPC: 019495423782
- Part Description: 2009 Chevrolet Tahoe OE Solutions Air Bag Impact Sensor
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
FAQ for Air Bag Sensor Repair
Q: What is the recommended torque for the Side Object Sensor bolt?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Inflatable Restraint Roof Rail have?
A:
It has a total of 8 bolts.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Inflatable Restraint Roof Rail Bolt?
A:
If the location is at the second-row roof rail assist handle bracket attachments, you can reinstall the roof rail assist handle bracket. If present, you can remove the M-6 bolt and plastic prefixation bracket from the module assembly. Then you can reinstall the module, ensure the module does not get damaged, and hand start the replacement M-7 bolt P/N 11609538. For cushion attachments, ensure the bolt goes through both layers of the attachment webbing, hand start any other bolts that were removed, and tighten the bolts to the original specification.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Side Object Sensor Bracket?
A:
You need to disconnect the electrical connectors.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Side Object Sensor?
A:
You need to unsnap the side sensor out of the side sensor bracket.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Inflatable Restraint Roof Rail Module Assembly?
A:
You need to release the connector position assurance (CPA) retainer, disconnect the electrical connectors, and ensure the roof rail inflator has been fully deployed before disposal.
By Bob
GM Specialist
01/11/2022Q: How many push pins does the Side Object Sensor have?
A:
It has a total of 3 push pins.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Side Object Sensor push pins?
A:
You need to disconnect the electrical connector and use a flat tool to pry out push pins.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Side Object Sensor Bracket nuts?
A:
The recommended torque is 6 Nm (53 lb in).
By Bob
GM Specialist
01/11/2022Q: How many nuts does the Side Object Sensor Bracket have?
A:
It has a total of 3 nuts.
By Bob
GM Specialist
01/11/2022See more FAQs (24)