< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Sensor, Ambient Air Temperature
PartNumber: 15936931
Product Specifications- Notes: Tahoe, Yukon
- Other Names: Ambient Temperature Sensor, Temperature Sensor
- Item Dimensions: 2.0 x 1.7 x 0.9 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Sensor, Ambient Air Temperature
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$5.86 MSRP:$12.24You Save: $6.38 (53%)
OEM (Genuine) 2009 Chevrolet Tahoe Sensor
PartNumber: 13587698
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Item Dimensions: 2.7 x 1.4 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22624069
- Part Description: 2009 Chevrolet Tahoe Sensor
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$45.58 MSRP:$82.52You Save: $36.94 (45%)
OEM (Genuine) 2009 Chevrolet Tahoe In-Car Sensor
PartNumber: 25885451
Product Specifications- Notes: Tahoe, Yukon, Escalade; 2ND Design; Upper; Tahoe & Yukon, Front, Push Pin Style; Tahoe & Yukon, Rear Auxiliary, Push Pin Style; Chevrolet & Gmc, Front, Push Pin Style; Chevrolet & Gmc, Rear Auxiliary, Push Pin Style
- Item Dimensions: 2.1 x 1.0 x 1.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe In-Car Sensor
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$5.52 MSRP:$9.98You Save: $4.46 (45%)
OEM (Genuine) 2009 Chevrolet Tahoe In-Car Temperature Sensor
PartNumber: 12160947
Product Specifications- Notes: Tahoe, Yukon, Escalade; 1St Design;Tahoe, Yukon, Escalade; 2ND Design; Lower; Tahoe & Yukon, Front, Twist Lock Style; Tahoe & Yukon, Rear Auxiliary, Twist Lock Style; Chevrolet & Gmc, Front, Twist Lock Style; Chevrolet & Gmc, Rear Auxiliary, Twist Lock Style
- Item Dimensions: 2.1 x 1.0 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe In-Car Temperature Sensor
Vehicle Fitment- 2009 Chevrolet Tahoe | Base, Hybrid, Limited, LS, LT, LTZ, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$7.52 MSRP:$13.62You Save: $6.10 (45%)
FAQ for Air Temperature Sensor Repair
Q: What should you do before replacing the Duct Air Temperature Sensor-Lower Right Side?
A:
You need to remove the front floor console, the radio front floor console speaker, the instrument panel (I/P) insulator, and the right side air distribution duct.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Duct Air Temperature Sensor-Lower Left Side?
A:
You need to remove the knee bolster.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the MAF/IAT sensor adapter clamp?
A:
The recommended torque is 4 Nm(35 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you install the Auxiliary Inside Air Temperature Sensor Assembly?
A:
You need to install the new sensor grille to the headliner and the inside air temperature sensor to the headliner and sensor grille, connect the electrical connector to the inside air temperature sensor, secure the headliner to the roof hook and loop retainers, and install the rear headliner retainers to the front headliner, the left rear coat hook and the third pillar molding.
By Bob
GM Specialist
01/11/2022Q: How do you install the Mass Airflow Sensor with Intake Air Temperature Sensor?
A:
You need to install the MAF/IAT sensor to the air cleaner assembly, connect the engine wiring harness electrical connector to the MAF/IAT sensor and install the air cleaner outlet resonator.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Duct Air Temperature Sensor-Upper Right Side?
A:
You need to remove the instrument panel upper trim panel with windshield defroster nozzle grille and the inflatable restraint instrument panel module.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Ambient Air Temperature Sensor?
A:
You need to remove the top portion of the grill and gently pull forward and disconnect the ambient air sensor electrical connector.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Air Temperature Sensor-Upper Auxiliary?
A:
You need to remove the right side C-pillar trim panel and disconnect the air temperature sensor electrical connector.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Ambient Air Temperature Sensor (DF5)?
A:
You need to remove the top portion of the grille and gently pull it forward.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Air Temperature Sensor-RH?
A:
You need to use long straight needle nose pliers, grasp the sensor in a parallel direction, and rotate the sensor 1/4 turn counterclockwise to remove the sensor and disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022See more FAQs (15)