< Back ×
2009 Chevrolet Tahoe Axle Shaft Seal
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Axle Seal
PartNumber: 12471686$12.23 MSRP:$22.22You Save: $9.99 (45%)Product Specifications- Notes: Tahoe, Yukon, Escalade
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.6 x 3.7 x 0.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26037309, 15522060
- Part Description: 2009 Chevrolet Tahoe Axle Seal
Vehicle Fitment- 2009 Chevrolet Tahoe | Base, Hybrid, Limited, LS, LT, LTZ, PPV, Premier, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS, 8 Cyl 6.5 L DIESEL
OEM (Genuine) 2009 Chevrolet Tahoe Seal Asm-Front Drive Axle Inner Shaft
PartNumber: 22761722$21.68 MSRP:$37.76You Save: $16.08 (43%)Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Output Shaft Seal
- Item Dimensions: 3.0 x 3.0 x 0.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12479012, 26059623, 12471591, 12471682, 15801507
- Part Description: 2009 Chevrolet Tahoe Seal Asm-Front Drive Axle Inner Shaft
Vehicle Fitment- 2009 Chevrolet Tahoe | Base, Hybrid, LS, LT, LTZ, PPV, Premier, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS, 8 Cyl 6.5 L DIESEL
OEM (Genuine) 2009 Chevrolet Tahoe Front Seal
PartNumber: 26064029$26.08 MSRP:$43.18You Save: $17.10 (40%)Product Specifications- Notes: Tahoe, Yukon, Escalade; 8.50, 8.625;Tahoe, Yukon, Escalade; 9.50; Tahoe, Yukon, Escalade
- Other Names: Front Seal, Pinion Seal
- Item Dimensions: 3.9 x 3.9 x 0.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Front Seal
Vehicle Fitment- 2009 Chevrolet Tahoe | Base, Hybrid, Limited, LS, LT, LTZ, PPV, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
OEM (Genuine) 2009 Chevrolet Tahoe Rear Seal
PartNumber: 23270117$10.65 MSRP:$20.07You Save: $9.42 (47%)Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Pinion Seal, Rear Seal
- Item Dimensions: 3.7 x 3.7 x 0.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Rear Seal
Vehicle Fitment- 2009 Chevrolet Tahoe | Base, Hybrid, LS, LT, LTZ, PPV, Premier, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Product Specifications- Notes: Tahoe, Yukon, Escalade; Tahoe, Yukon, Escalade; AWD
- Other Names: Deflector, Pinion Seal, Tube
- Item Dimensions: 4.2 x 4.1 x 0.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Tube
Vehicle Fitment- 2009 Chevrolet Tahoe | Base, Hybrid, LS, LT, LTZ, PPV, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS, 8 Cyl 6.5 L DIESEL
Product Specifications- Notes: Centric Premium Oil & Grease Seal
- UPC: 805890575191
- Part Description: 2009 Chevrolet Tahoe Premium™ Axle Shaft Seal
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
Product Specifications- Notes: 8.25" Ring Gear:
- Bore: 2.407"
- Boretite: No
- Outside Diameter: 2.412"
- Shaft: 1.248"
- UPC: 085311523684
- Width: 0.445"
- Part Description: 2009 Chevrolet Tahoe Axle Shaft Seal
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
FAQ for Axle Shaft Seal Repair
Q: What should be noticed when replacing the Rear Axle Shaft Gasket?
A:
When installing the new gasket, apply a small amount of clean grease to hold the gasket in place while aligning the mounting hole in the axle shaft and the hub.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the Axle Shaft Bolt?
A:
The recommended torque is 156 Nm(115 lb-ft).
By Bob
GM Specialist
28/10/2022Q: How many bolts does the Axle Shaft have?
A:
It has a total of 8 bolts.
By Bob
GM Specialist
28/10/2022Q: How do you remove the Rear Axle Hub, Bearing, Cup, and/or Seal?
A:
You need to remove the tire and wheel assembly, the brake caliper bracket, the axle shaft, the axle nut retaining ring, and the key, use the J 2222-C-wrench, loosen the adjusting nut, remove the adjusting nut, the hub from the axle housing and the rotor, use a suitable seal removal tool to remove the oil seal from the wheel hub, remove the inner hub bearing, use a brass drift and a hammer to remove the inner hub bearing cup, remove the retaining ring from the wheel hub and use the J 24426-installer and the J 8092-handle to remove the outer hub bearing and bearing cup.
By Bob
GM Specialist
28/10/2022Q: What should I lubricate when installing the Rear Axle Hub, Bearing, Cup, and/or Seal?
A:
You need the outer wheel bearing, the inner wheel bearing, the outer wheel bearing cup, the inner wheel bearing cup, and the axle hub spindle.
By Bob
GM Specialist
28/10/2022Q: How to replace both the left side seal and bearing?
A:
You need to remove the differential carrier assembly, place the differential carrier assembly into a vise, clamp only on the mounting flange of the differential carrier assembly case, remove the inner axle shaft using a hammer and a brass drift, install the J 29369-1, 8.25-inch axle, or the J 29369-2, 9.25-inch axle, behind the inner axle shaft seal or the inner axle shaft bearing as necessary, install the J 2619-01 to the J 29369-1 or the J 29369-2 and remove the inner axle shaft seal and/or the inner axle shaft bearing.
By Bob
GM Specialist
28/10/2022Q: How to replace the left-side seal?
A:
You need to place an alignment mark between the inner axle shaft and the wheel drive shaft. If servicing the 8.25-inch axle, remove the shock module. Then you can disconnect the wheel drive shaft from the inner axle shaft and remove the inner axle shaft using a hammer and a brass drift and the inner axle shaft seal using a suitable seal remover tool.
By Bob
GM Specialist
28/10/2022See more FAQs (2)