< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Fan Shroud
PartNumber: 15780789
Product Specifications- Notes: W/Hd Cooling; Tahoe, Yukon; 4.8L, 5.3L; W/Trailering Pkg.
- Other Names: Fan Shroud, Shroud
- Item Dimensions: 9.5 x 41.6 x 23.5 inches
- Item Weight: 12.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Fan Shroud
Vehicle Fitment- 2009 Chevrolet Tahoe | LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$274.35 MSRP:$413.82You Save: $139.47 (34%)
OEM (Genuine) 2009 Chevrolet Tahoe Fan Shroud
PartNumber: 15780788
Product Specifications- Notes: W/O Hd Cooling; Tahoe, Yukon; 4.8L, 5.3L; W/O Trailering Pkg.;Tahoe, Yukon; 6.2L
- Other Names: Fan Shroud, Shroud
- Item Dimensions: 9.2 x 40.8 x 23.3 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Fan Shroud
Vehicle Fitment- 2009 Chevrolet Tahoe | LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$216.98 MSRP:$341.19You Save: $124.21 (37%)
OEM (Genuine) 2009 Chevrolet Tahoe Fan Shroud
PartNumber: 25880379
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Fan Shroud
- Item Dimensions: 43.8 x 24.5 x 8.8 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Fan Shroud
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid | 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
$237.34 MSRP:$358.00You Save: $120.66 (34%)
FAQ for Cooling Fan Shroud Repair
Q: How do you remove the Engine Coolant Fan Upper Shroud (Mechanical)?
A:
You need to loosen the air cleaner outlet duct clamps from the throttle body and the air cleaner outlet duct clamps from the mass airflow sensor and remove the air cleaner outlet duct. If equipped remove the throttle body heater hose retainer from the fan shroud. If equipped remove the inlet radiator hose retainer from the fan shroud. Then you can remove the fan shroud retainers, the fan shroud bolts, and the upper fan shroud.
By Bob
GM Specialist
01/11/2022Q: How do you install the Engine Coolant Fan Upper Shroud (Mechanical)?
A:
You need to install the upper fan shroud, the fan shroud bolts, and the fan shroud retainers. If equipped install the inlet radiator hose retainer to the fan shroud. If equipped install the throttle body heater hose retainer to the fan shroud. Then you can install the air cleaner outlet duct and tighten the air cleaner outlet duct clamp at the throttle body and the air cleaner outlet duct clamp at the mass airflow sensor.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Cooling Fan and Shroud (HP2)?
A:
You need to remove the radiator air upper baffle and air cleaner resonator outlet duct, reposition the radiator vent hose, remove the radiator surge tank, disconnect the engine coolant fan electrical connectors and engine coolant fan resistor electrical connectors, remove the generator control module coolant pump hose (pump to the radiator), the generator control module coolant outlet hose and the trans cooler line clip from the right side of the shroud.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Engine Coolant Fan Lower Shroud (Mechanical)?
A:
You need to remove the radiator and disengage the two clips from the radiator. If equipped with an engine oil cooler, remove the oil cooler hose clip from the lower fan shroud, and remove the shroud from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How do you install the Engine Coolant Fan Lower Shroud (Mechanical)?
A:
You need to install the lower fan shroud, ensure it is centered over the lower radiator support and engage the two clips from the radiator. If equipped with the engine oil cooler, install the oil cooler hose clip to the lower fan shroud, and install the radiator.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Cooling Fan Shroud have?
A:
It has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the air cleaner outlet duct clamp?
A:
The recommended torque is 4 Nm (35 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (2)