< Back ×
2009 Chevrolet Tahoe Crankshaft Seal
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Crankshafts, Pistons, Rings & Connecting Rods
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Seal, Engine Front Cover
PartNumber: 12585673$24.34 MSRP:$48.32You Save: $23.98 (50%)Product Specifications- Notes: Tahoe, Yukon, Escalade
- Item Dimensions: 3.5 x 3.5 x 0.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12550565, 12561244
- Part Description: 2009 Chevrolet Tahoe Seal, Engine Front Cover
Vehicle Fitment- 2009 Chevrolet Tahoe | Base, Hybrid, LS, LT, LTZ, PPV, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Victor Reinz® Rear Improved Design Crankshaft Seal for 2009 Chevrolet Tahoe
PartNumber: 19-10080-01$41.26Product Specifications- Notes: 1 Piece;Premium, Improved Design; PTFE Rubber; Rear
- Material: PTFE Rubber
- Part Description: 2009 Chevrolet Tahoe Rear Improved Design Crankshaft Seal
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 4.8L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 5.3L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.0L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.2L
OEM (Genuine) 2009 Chevrolet Tahoe Crankshaft Seal
PartNumber: 89060436$21.92 MSRP:$36.30You Save: $14.38 (40%)Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Crankshaft Seal, Rear Main Seal
- Item Dimensions: 5.2 x 5.1 x 1.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12585671, 89018162, 12550574
- Part Description: 2009 Chevrolet Tahoe Crankshaft Seal
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Product Specifications- Quantity Per Application: 1
- UPC: 085311492904
- Part Description: 2009 Chevrolet Tahoe Rear Crankshaft Seal
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 4.8L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 5.3L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.0L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.2L
FAQ for Crankshaft Seal Repair
Q: How do you remove the Crankshaft Rear Oil Seal Housing?
A:
You need to remove the automatic transmission flexplate, the oil pan-to-rear oil seal housing bolts, the rear oil seal housing bolts, and the rear oil seal housing and gasket, discard the gasket and remove and discard the rear oil seal.
By Bob
GM Specialist
29/10/2022Q: How do you install the Crankshaft Front Oil Seal?
A:
You need to lubricate the outer edge of the oil seal with clean engine oil and the front cover oil seal bore with clean engine oil, install the crankshaft front oil seal onto the J 41478 guide and the J 41478 threaded rod (with nut, washer, guide, and oil seal) into the end of the crankshaft and use the J 41478 to install the oil seal into the cover bore and then install the crankshaft balancer.
By Bob
GM Specialist
29/10/2022Q: How do you install the Crankshaft Rear Oil Seal Housing?
A:
You need to apply a 5 mm (0.2 in) bead of sealant, and 20 mm (0.8 in) to the 2 joints (a) at the rear of the block/pan and inspect the rear oil gallery plug for proper installation.
By Bob
GM Specialist
29/10/2022Q: How do you remove the crankshaft front oil seal?
A:
You need to remove the crankshaft balancer and the crankshaft front oil seal from the front cover.
By Bob
GM Specialist
29/10/2022