< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Lift Supports
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Assist Cylinder
PartNumber: 25876306
Product Specifications- Notes: Tahoe
- Other Names: Assist Cylinder, Lift Cylinder
- Item Dimensions: 27.0 x 1.4 x 1.0 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15855373
- Part Description: 2009 Chevrolet Tahoe Assist Cylinder
Vehicle Fitment- 2009 Chevrolet Tahoe | LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$16.51 MSRP:$24.89You Save: $8.38 (34%)
StrongArm® Hood Lift Support for 2009 Chevrolet Tahoe
PartNumber: 6155Product Specifications- Body: 19.00
- BODY CONNECTION: ball socket (nylon) 16 degree
- Brackets: No
- Compressed Length: 18.81
- Extended Length: 25.06
- Force: 129.00
- Hardware Kit: No
- High Performance Item: N
- Internal Springs: No
- Is Application Specific: Y
- Material: Heavy gauge steel pressure tube provides long life; Rubber o-ring piston seal for controlled lift; Teflon backup ring gives enhanced performance
- Shaft: 8.00
- SHAFT CONNECTION: ball socket (nylon) 10mm
- Stroke: 6.25
- UPC: 845998009075
- Part Description: 2009 Chevrolet Tahoe Hood Lift Support
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
$18.24
OEM (Genuine) 2009 Chevrolet Tahoe Assist Cylinder
PartNumber: 25880917
Product Specifications- Notes: Tahoe, Yukon; Chevrolet
- Other Names: Assist Cylinder, Lift Cylinder
- Item Dimensions: 23.9 x 1.8 x 0.9 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25815965
- Part Description: 2009 Chevrolet Tahoe Assist Cylinder
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid | 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
FAQ for Hood Lift Support Repair
Q: What should you do before replacing the Hood Open Assist Spring?
A:
You need to remove the hood.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Hood Strut retainer?
A:
You need to release the locking tabs on the strut and ensure the clip is fully seared when the rod is reinstalled. If the clip cannot be fully seated a new rod should be installed.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Hood Open Assist Spring have?
A:
It has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Hood Open Assist Spring bolt?
A:
The recommended torque is 22 Nm(16 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How many retainers does the Hood Strut have?
A:
It has a total of 2 retainers.
By Bob
GM Specialist
01/11/2022