< Back ×
2009 Chevrolet Tahoe Liftgates
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Lift Gate
PartNumber: 25993186$1961.64 MSRP:$2959.34You Save: $997.70 (34%)Product Specifications- Notes: W/O Power Lift Gate, W/O Power Lift Gate
- Other Names: Lift Gate
- Item Dimensions: 75.2 x 17.1 x 54.9 inches
- Item Weight: 30.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25899306
- Part Description: 2009 Chevrolet Tahoe Lift Gate
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
OEM (Genuine) 2009 Chevrolet Tahoe Lift Gate
PartNumber: 25867975$1250.39 MSRP:$1886.34You Save: $635.95 (34%)Product Specifications- Notes: W/Power Lift Gate, W/Power Lift Gate
- Other Names: Lift Gate
- Item Dimensions: 77.5 x 55.2 x 18.0 inches
- Item Weight: 79.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15892229, 15277943, 15918941
- Part Description: 2009 Chevrolet Tahoe Lift Gate
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
FAQ for Liftgates Repair
Q: How many retainers does the sensor side upper liftgate have?
A:
It has a total of 4 retainers.
By Bob
GM Specialist
01/11/2022Q: How many bushings does the liftgate Window Hinge have?
A:
It has a total of 4 bushings.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Liftgate Side Upper Sensor (Except Avalanche and EXT Escalade)?
A:
You need to remove the liftgate trim panel and disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: How many E-rings does the Liftgate Window Hinge have?
A:
It has a total of 2 E-rings.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Liftgate Close Actuator Motor Control Module (Except Avalanche and Escalade EXT)?
A:
You need to remove the bodyside trim panel and disconnect the power liftgate actuator rod.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Liftgate Close Actuator Motor Control Module?
A:
You need to disconnect the electrical connector and cut the tie strap if equipped.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Liftgate Window?
A:
You need to disconnect the liftgate window support struts and the center high-mounted stop lamp applique and the liftgate garnish molding.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Liftgate Close Actuator Motor Control Module Bolt?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Liftgate Close Actuator Motor Control Module have?
A:
It has a total of 3 bolts.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Sensor Side Upper Liftgate retainers?
A:
The retainers are for one-time use only. They must be replaced after being removed.
By Bob
GM Specialist
01/11/2022See more FAQs (8)