< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Thermostat Unit
PartNumber: 12587395
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Item Dimensions: 4.0 x 4.2 x 4.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Thermostat Unit
Vehicle Fitment- 2009 Chevrolet Tahoe | High Country, Hybrid, LS, LT, LTZ, PPV, Premier, RST, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$9.00 MSRP:$16.28You Save: $7.28 (45%)
Gates® Engine Coolant Water Outlet for 2009 Chevrolet Tahoe
PartNumber: CO34829Product Specifications- Notes: Thermostat Cover
- By-Pass Holes: No
- Material: Cast Aluminum
- Number of Bolt Holes: 2
- Number of Gaskets: 0
- Number of Seals: 0
- OE Exact: Yes
- Outlet Inside Diameter 1: 1.177"
- Outlet Outside Diameter 1: 1.548"
- Type: Coolant Outlet
- UPC: 770075733751
- Part Description: 2009 Chevrolet Tahoe Engine Coolant Water Outlet
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 4.8L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 5.3L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.2L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.0L
$13.32
Four Seasons® Engine Coolant Water Outlet W O Thermostat for 2009 Chevrolet Tahoe
PartNumber: 85945Product Specifications- Notes: Outlet
- Gasket or Seal Included: Not Included
- Inlet Dia. IN: 1.205
- Material: Aluminum
- Maximum Height: 2.425
- Meets / Exceeds OEM: Yes
- Mnt Flange Width IN: .378
- Style: w/o Thermostat
- Thermostat Included: Not Included
- UPC: 096361859456
- Part Description: 2009 Chevrolet Tahoe Engine Coolant Water Outlet W O Thermostat
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
$9.15
FAQ for Thermostat Housing Repair
Q: How do you remove the Engine Coolant Thermostat Housing (LY2, LH6, LY5, LMG, LY6)?
A:
You need to drain the cooling system, remove the air cleaner outlet duct, reposition the radiator outlet hose clamp at the water pump inlet and remove the radiator outlet hose from the water pump inlet, the water pump inlet bolts, and the water pump inlet from the water pump and remove and discard the water pump inlet seal.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the water pump inlet bolts?
A:
The recommended torque is 15 Nm (11 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you install the Engine Coolant Thermostat Housing (LY2, LH6, LY5, LMG, LY6)?
A:
You need to install a new water pump inlet seal to the water pump inlet, position the water pump inlet to the water pump, install the water pump inlet bolts and the radiator outlet hose to the water pump inlet, position the radiator outlet hose clamp at the water pump inlet, install the air cleaner outlet duct and fill the cooling system.
By Bob
GM Specialist
01/11/2022