2009 Chevrolet Tahoe Washer Pump

You can lift the Wiper Blade assemblies off of the windshield glass, clean the wiper blade element with a clean cloth saturated with full-strength washer solution, rinse the wiper blade assemblies with water and place the wiper blade assemblies back onto the windshield glass.

You need to ensure the square edge faces upward upon installation of the new level indicator.

You need to remove the old conductive jell residue from the windshield mounting bracket, clean the area of the windshield that contacts the windshield moisture sensor ens with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened lint-free cloth, align and secure the two sensor halves back as one unit, remove the-plastic protective-covering from the lens, position and install the moisture sensor back onto the windshield bracket, connect the electrical cover and secure the rain sensor module trim cover.