2009 Chevrolet Trailblazer Oil Dipstick Tube

First, you need to wipe the excess oil from the Oil Filter housing, lubricate the oil filter seal with clean engine oil, install the new oil filter and the oil pan drain plug, and lower the vehicle. Then, please fill the crankcase with the proper quantity of engine oil, remove the oil level indicator, wipe the indicator with a clean cloth, and install the oil level indicator. Finally, you should remove the oil level indicator and check the oil level.

First, you need to disconnect the negative battery cable. Then, please remove the A/C compressor bottom bolts and loosen the top bolts, remove the oil level indicator and tube, and remove the stabilizer shaft. You also need to remove the front differential and secure it to the frame, remove the front drive axle intermediate shaft bearing assembly and drain the engine oil. Finally, you should unclip the transmission cooler lines from the engine block, remove 4 transmission bell housing bolts, and the remaining Oil Pan bolts, and place 2 oil pan bolts in the jack screws on the oil pan and tighten evenly to release the oil pan from the engine.