2009 Chevrolet Trailblazer Window Motor

First, you need to remove the door trim panel, the speaker, and the water deflector, loosen the regulator window carrier bolts and raise and support the window. Then, please disconnect the electrical connector from the regulator motor, loosen the upper 2 bolts that retain the regulator assembly to the door, and remove the remaining 3 bolts that retain the Window Regulator assembly and the motor to the door. Finally, you should lift the regulator assembly upward to release the upper 2 bolts, rotate the upper portion of the regulator assembly forward, remove the regulator assembly through the door opening, place the regulator assembly on a prepared surface, and remove the upper 2 bolts from the regulator assembly.

First, you need to install the quarter Window Switch to the overhead console, ensuring the retaining tabs are fully seated. Then, please connect the electrical connector to the quarter window switch. Finally, you should install the overhead console.