< Back ×
2009 GMC Envoy Seat Cushion Pad
My Vehicle Change Vehicle
2009 GMC Envoy
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2009 GMC Envoy Passenger Discriminating Sensor
PartNumber: 19168633$372.93 MSRP:$531.36You Save: $158.43 (30%)Product Specifications- Notes: Envoy/Trailblazer/Rainier
- Location: Passenger Side
- Other Names: Passenger Discriminating Sensor, Seat Cushion Pad
- Item Dimensions: 9.7 x 25.2 x 25.5 inches
- Item Weight: 6.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 GMC Envoy Passenger Discriminating Sensor
Vehicle Fitment- 2009 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2009 GMC Envoy Seat Cushion Pad
PartNumber: 89043458$90.64 MSRP:$136.74You Save: $46.10 (34%)Product Specifications- Notes: W/Short Wheel Base, Second Row
- Location: Passenger Side
- Other Names: Seat Cushion Pad
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 GMC Envoy Seat Cushion Pad
Vehicle Fitment- 2009 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
Product Specifications- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 24.7 x 22.6 x 8.2 inches
- Item Weight: 20.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 GMC Envoy Seat Cushion Pad
Vehicle Fitment- 2009 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
Product Specifications- Notes: W/Short Wheel Base, Second Row
- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 GMC Envoy Seat Cushion Pad
Vehicle Fitment- 2009 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
FAQ for Seat Cushion Pad Repair
Q: What is the recommended torque for the seat module retaining screw?
A:
The recommended torque is 5 Nm (44 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Driver or Passenger Seat Back Cushion Finish Panel?
A:
Remove the front bucket seat assembly, the front seat back cover and pad, the lumbar cables from the panel clips, the 2 push-pin fasteners from each side of the panel, the push-pin fastener from the bottom of the panel, remove the panel from the top of the seat-back frame, and the seat-back frame.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear seat back mounting nut?
A:
The recommended torque is 45 Nm (33 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the seat back hinge bolts?
A:
The recommended torque is 35 Nm (26 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you install the Rear Seat Back Cushion Hinge?
A:
You need to position the hinge bracket to the seat back frame, install the hinge bracket to the seat back frame with 2 bolts, the latch bracket to the hinge bracket with 2 bolts, and the latch release cables to the latch release mechanism, located at the bottom of the seat back frame, the head restraint release cable the left-hand hinge bracket, and install the seat back cover and pad.
By Bob
GM Specialist
01/11/2022Q: What should you remove to get access to the Driver or Passenger Seat Back Cushion Frame?
A:
You need to remove the seat assembly from the vehicle first.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the mounting screw securing the seat belt bezel to the top of the seat back?
A:
The recommended torque is 3 Nm (26 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear seat back release latch bezel screw?
A:
The recommended torque is 3 Nm (26 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the screws securing the inflatable side impact module to the seat back frame?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the seat switch bezel mounting screws?
A:
The recommended torque is 3 Nm (26 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (19)