< Back ×
My Vehicle Change Vehicle
2009 GMC Savana 2500
OEM (Genuine) 2009 GMC Savana 2500 Rear Cable
PartNumber: 20779564
Product Specifications- Notes: Express, Savana; Left; 1/2 & 3/4 Ton
- Other Names: Rear Cable
- Item Dimensions: 11.4 x 11.1 x 3.7 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25941144, 25752970
- Part Description: 2009 GMC Savana 2500 Rear Cable
Vehicle Fitment- 2009 GMC Savana 2500 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$66.07 MSRP:$124.74You Save: $58.67 (48%)OEM (Genuine) 2009 GMC Savana 2500 Front Cable
PartNumber: 15208793
Product Specifications- Notes: Express, Savana
- Item Dimensions: 13.7 x 13.5 x 3.4 inches
- Item Weight: 1.50 Pounds
- Part Description: 2009 GMC Savana 2500 Front Cable
Vehicle Fitment- 2009 GMC Savana 2500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$34.32 MSRP:$62.14You Save: $27.82 (45%)OEM (Genuine) 2009 GMC Savana 2500 Rear Cable
PartNumber: 20779562Product Specifications- Notes: Express, Savana; Right; 1/2 & 3/4 Ton
- Other Names: Rear Cable
- Item Dimensions: 4.0 x 11.6 x 11.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25752971, 25941142, 15942865
- Part Description: 2009 GMC Savana 2500 Rear Cable
Vehicle Fitment- 2009 GMC Savana 2500 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$26.36 MSRP:$49.75You Save: $23.39 (48%)OEM (Genuine) 2009 GMC Savana 2500 Intermediate Cable
PartNumber: 25892520Product Specifications- Notes: Express, Savana; 3/4 Ton; 135" Wheelbase
- Other Names: Intermediate Cable
- Item Dimensions: 28.3 x 0.3 x 0.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25745117
- Part Description: 2009 GMC Savana 2500 Intermediate Cable
Vehicle Fitment- 2009 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
OEM (Genuine) 2009 GMC Savana 2500 Cable Asm-Parking Brake Intermediate
PartNumber: 25892521
Product Specifications- Notes: Express, Savana; 3/4 Ton; 155" Wheelbase
- Other Names: Intermediate Cable
- Item Dimensions: 48.8 x 0.3 x 0.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25745118
- Part Description: 2009 GMC Savana 2500 Cable Asm-Parking Brake Intermediate
Vehicle Fitment- 2009 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Parking Brake Cable Repair
Q: What is the recommended torque for the park brake cable guide bolt?
A:
The recommended torque is 13 Nm (115 lb in).
By Bob
GM Specialist
02/11/2022Q: What is the disabling procedure for the Parking Brake Cable Adjuster?
A:
The procedure is to hold the pedal in the FULL upward position, pull rearward on the front park brake cable until the pedal drum reaches its full reset position, insert a scribe or the shaft of a thin screwdriver on an upward angle through the hole in the front of the pedal assembly, past the retracted pedal drum, and into the hole in the back of the pedal assembly, release the cable, and remove the component that requires service.
By Bob
GM Specialist
02/11/2022Q: How do you install the Parking Brake Cable Equalizer?
A:
You need to install the equalizer, enable the park brake cable automatic adjuster, and check the adjustment.
By Bob
GM Specialist
02/11/2022Q: How do you enable the Parking Brake Cable Adjuster?
A:
You need to hold the park brake pedal in the FULL upward position, pull rearward on the front park brake cable until the tension is released from the scribe or nail installed through the holes in the pedal assembly, remove the scribe or screwdriver, release the park brake cable until it returns to its original position, release the park brake pedal, and apply and release the park brake pedal.
By Bob
GM Specialist
02/11/2022Q: How do you remove the cable from the backing plate?
A:
You need to compress the spring by pushing towards the lever, depress the locking tabs, pull the cable housing out of the backing plate, and remove the cable through the slot in the backing plate.
By Bob
GM Specialist
02/11/2022Q: How do you install the Parking Brake Intermediate Cable?
A:
You need to install the intermediate cable, connect the intermediate park brake cable to the front and rear park brake cables, connect the intermediate cable to the front and rear park brake cables, pass it through the cable guide, enable the park brake cable automatic adjuster, and adjust the park brake system.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the Parking Brake Front Cable?
A:
The procedure is to release the parking brake, remove the park brake pedal, roll the carpet back to access the cable anchor nut and grommet, remove the cable anchor nut, the cable and grommet from the floor, disconnect the front cable from the intermediate cable, remove the cable from the frame bracket by depressing the retaining tabs, and remove the cable.
By Bob
GM Specialist
02/11/2022Q: How do you install the Parking Brake Cable Guide?
A:
You need to install the park brake cable guide to the park brake cable, install the park brake cable guide, and install the park brake cable guide bolt to the frame.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the Parking Brake Cable Equalizer?
A:
The procedure is to disable the park brake cable automatic adjuster and remove the equalizer.
By Bob
GM Specialist
02/11/2022See more FAQs (4)