< Back ×
2009 GMC Savana 3500 Camber and Alignment Kit
My Vehicle Change Vehicle
2009 GMC Savana 3500
< Back to View All
Alignment Kits
- Department
- Prices
OEM (Genuine) 2009 GMC Savana 3500 Motor Nut
PartNumber: 11516078$4.86 MSRP:$7.71You Save: $2.85 (37%)Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 1.6 x 1.5 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 11518997, 11588927, 11508101
- Part Description: 2009 GMC Savana 3500 Motor Nut
Vehicle Fitment- 2009 GMC Savana 3500 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
OEM (Genuine) 2009 GMC Savana 3500 Alignment Cam
PartNumber: 15741217$4.66 MSRP:$7.36You Save: $2.70 (37%)Product Specifications- Notes: RWD; AWD
- Other Names: Alignment Cam
- Item Dimensions: 3.3 x 2.4 x 0.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 GMC Savana 3500 Alignment Cam
Vehicle Fitment- 2009 GMC Savana 3500 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
FAQ for Camber and Alignment Kit Repair
Q: What should you do before adjusting the caster and camber angles?
A:
You should jounce the front bumper three times to allow the vehicle to return to its normal height.
By Bob
GM Specialist
01/11/2022Q: How do you make the caster and camber adjustments?
A:
The caster and camber adjustments are made by rotating the offset cam bolt and the cam in the slotted frame bracket to reposition the control arm.
By Bob
GM Specialist
01/11/2022Q: What may cause steering and vibration complaints?
A:
Steering and vibration complaints may be caused by improper alignment, wheel, and tire imbalance, and tire lead due to worn or improperly manufactured tires.
By Bob
GM Specialist
01/11/2022Q: How do you adjust the wheel alignment - steering wheel angle and/or front toe?
A:
You can loosen the jam nut on the tie rod, rotate the inner tie rod to the required toe specification setting, tighten the jam nut on the tie rod, check the toe setting, and re-adjust the toe setting.
By Bob
GM Specialist
01/11/2022