< Back ×
My Vehicle Change Vehicle
2009 GMC Savana 3500
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2009 GMC Savana 3500 Camshaft
PartNumber: 12625439
Product Specifications- Notes: Express, Savana; 6.0L
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.4 x 28.6 inches
- Item Weight: 14.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12612274
- Part Description: 2009 GMC Savana 3500 Camshaft
Vehicle Fitment- 2009 GMC Savana 3500 | Base, LS, LT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$264.62 MSRP:$420.17You Save: $155.55 (38%)OEM (Genuine) 2009 GMC Savana 3500 Camshaft
PartNumber: 12689035
Product Specifications- Notes: Express, Savana; 4.8L
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.4 x 28.3 inches
- Item Weight: 14.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12593205, 12625437
- Part Description: 2009 GMC Savana 3500 Camshaft
Vehicle Fitment- 2009 GMC Savana 3500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS
$165.54 MSRP:$274.00You Save: $108.46 (40%)OEM (Genuine) 2009 GMC Savana 3500 Camshaft
PartNumber: 98077453
Product Specifications- Notes: Express, Savana
- Item Dimensions: 22.2 x 2.5 x 2.5 inches
- Item Weight: 12.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 97211770
- Part Description: 2009 GMC Savana 3500 Camshaft
Vehicle Fitment- 2009 GMC Savana 3500 | Base | 8 Cyl 6.6 L DIESEL
FAQ for Camshaft Repair
Q: What is the recommended torque when installing the CMP actuator magnet bolts?
A:
You can tighten it to 12 Nm (106 lb in).
By Bob
GM Specialist
29/10/2022Q: What is the first step of the removal procedure for the camshaft?
A:
The first step is to remove the radiator support.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the camshaft position actuator magnet?
A:
The procedure is to remove the water pump, disconnect the engine harness electrical connector, remove the CMP actuator magnet bolts and magnet, and remove the CMP actuator magnet gasket.
By Bob
GM Specialist
29/10/2022Q: How do you install the camshaft position actuator solenoid valve?
A:
You can install a NEW CMP actuator solenoid valve, tighten the CMP actuator solenoid valve, remove the J 42386-A and install the CMP actuator magnet.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the camshaft position actuator?
A:
The procedure is to remove the oil pump, remove the camshaft position actuator solenoid valve, loosen and separate the CMP actuator and timing chain from the camshaft, remove the CMP actuator and timing chain, and insert and secure a tie strap through the center of the actuator and over the reluctor wheel.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the camshaft position actuator solenoid valve?
A:
The procedure is to install the J 42386-A and bolts, remove the camshaft position (CMP) actuator magnet, remove the CMP actuator solenoid valve and discard the solenoid valve.
By Bob
GM Specialist
29/10/2022Q: What is the purpose of rotating the camshaft or crankshaft sprockets?
A:
The purpose is to align the timing marks.
By Bob
GM Specialist
29/10/2022See more FAQs (2)