< Back ×
2009 GMC Savana 3500 Hood Latch
My Vehicle Change Vehicle
2009 GMC Savana 3500
< Back to View All
Hoods
- Department
- Brands
- Prices
$77.64Product Specifications- Notes: Packaging Type: Box; Pkg Quantity: 1
- Attachment Method: Bolt
- Cable Included: No
- Installation Instructions Included: No
- OE Part Number: 25721612, 15873422
- Thickness: 0.69 In.
- UPC: 885484893917
- Width: 5.5 In.
- Part Description: 2009 GMC Savana 3500 OE Solutions Hood Latch
Vehicle Fitment- 2009 GMC Savana 3500 | All Trims | All Engines
OEM (Genuine) 2009 GMC Savana 3500 Latch
PartNumber: 22872577$88.07 MSRP:$132.88You Save: $44.81 (34%)Product Specifications- Notes: Express, Savana; W/O Remote Start
- Other Names: Latch, Lock
- Item Dimensions: 6.4 x 4.2 x 4.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85588600
- Part Description: 2009 GMC Savana 3500 Latch
Vehicle Fitment- 2009 GMC Savana 3500 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
OEM (Genuine) 2009 GMC Savana 3500 Latch
PartNumber: 25721612$137.00 MSRP:$206.69You Save: $69.69 (34%)Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 7.1 x 6.7 x 6.6 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85588601
- Part Description: 2009 GMC Savana 3500 Latch
Vehicle Fitment- 2009 GMC Savana 3500 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
FAQ for Hood Latch Repair
Q: What is the removal procedure for the hood latch cover?
A:
The procedure is to remove the radiator grille, remove the push pin rivet retainers and remove the hood latch cover.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood rear seal?
A:
The procedure is to pull up the rear hood seal and remove the rear hood seal.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood's primary and secondary latch?
A:
The procedure is to remove the following: the bolts retaining the hood latch to the radiator support, the hood latch, and the hood release cable.
By Bob
GM Specialist
01/11/2022Q: How do you install the hood rear seal?
A:
You can align the slot in the rear hood seal with the cowl pinch-weld flange and press the rear hood seal into place.
By Bob
GM Specialist
01/11/2022Q: How do you install the hood latch cover?
A:
You can install the hood latch cover to the radiator support, install the push pin rivet retainers, and install the radiator grille.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when tightening the bolts retaining the hood latch to the radiator support?
A:
You can tighten it to 15 Nm (11 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (1)