< Back ×
2009 GMC Savana 3500 TPMS Sensor
My Vehicle Change Vehicle
2009 GMC Savana 3500
< Back to View All
TPMS Sensors
- Department
- Brands
- Prices
$35.38Product Specifications- Maximum Pressure Reading: 40 PSI
- OE Part Number: 10394110, 12768826, 13586335, 15268606, 15825475, 15921013, 15922396, 20922900, 20923680, 20925924, 22853741, 22854866, 25920615, 25952370, 43130-85Z00, 43130-85Z03, 15254101, 25799331, 15123145, 15202272
- UPC: 019495230236
- Valve Color: Silver
- Valve Length: 0.50 in
- Part Description: 2009 GMC Savana 3500 Tpms Sensor
Vehicle Fitment- 2009 GMC Savana 3500 | All Trims | All Engines
$5.12 MSRP:$7.70You Save: $2.58 (34%)Product Specifications- Notes: 1 1/4" Long
- Other Names: TPMS Sensor Valve, Valve Stem
- Item Dimensions: 2.5 x 1.2 x 0.8 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 GMC Savana 3500 TPMS Sensor Valve
Vehicle Fitment- 2009 GMC Savana 3500 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$76.46 MSRP:$144.28You Save: $67.82 (48%)Product Specifications- Notes: Express, Savana
- Item Dimensions: 3.6 x 1.8 x 1.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 20925924
- Part Description: 2009 GMC Savana 3500 Sensor
Vehicle Fitment- 2009 GMC Savana 3500 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Product Specifications- Notes: 315 MHz, Clamp In, 62 in-lbs, 7 N.m; OE Manufactured
- Gasket or Seal Included: YES
- Monitor Type: Direct
- Mounting Hardware Included: YES
- Mounting Method: Clamp In
- Power Source: Electric
- Real Time Pressure Signal Transmission: YES
- Universal Or Specific Fit: Specific
- UPC: 042511218123
- Part Description: 2009 GMC Savana 3500 TPMS Sensor
Vehicle Fitment- 2009 GMC Savana 3500 | All Trims | All Engines
FAQ for TPMS Sensor Repair
Q: How do you install the tire pressure indicator sensor?
A:
You can clean any dirt or debris from the grommet sealing area, insert the sensor in the wheel hole, install the sensor nut and position the sensor body parallel to the inside wheel surface, install the tire on the wheel, install the tire/wheel assembly on the vehicle, lower the vehicle and learn the tire pressure sensors.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the tire pressure indicator sensor?
A:
The procedure is to remove the following: the tire/wheel assembly, the tire from the wheel, the tire pressure sensor nut, and the tire pressure sensor.
By Bob
GM Specialist
02/11/2022