Part Description: 2009 GMC Sierra 1500 INJECTOR ASM, SEQ M/PORT FUEL
More Info
Vehicle Fitment
2009 GMC Sierra 1500 | Denali, Hybrid, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
FAQ for Fuel Injector Repair
Q: What is the only recommended injector cleaning agent?
A:
GM Upper Engine and Fuel Injector Cleaner is the only injector cleaning agent recommended.
By Bob
GM Specialist
01/11/2022
Q: What is the purpose of using care in removing the fuel injectors?
A:
The purpose is to prevent damage to the fuel injector electrical connector pins or the fuel injector nozzles.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when installing the fuel rail bolts?
A:
You can tighten it to 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should you ensure when installing the fuel level sensor?
A:
You should ensure that the Fuel Level Sensor retainers engage the module reservoir.
Q: How do you install the fuel tank pressure sensor (15 Reg Cab w/26 gal Tank)?
Q: What is the removal procedure for the fuel pressure sensor?
A:
The procedure is to disconnect the chassis wiring harness electrical connector, wrap a shop towel around the Fuel Pressure Sensor fitting, remove the fuel pressure sensor from the fuel line and remove the fuel pressure sensor O-ring seal.