Part Description: 2009 GMC Sierra 1500 Manifold Absolute Pressure Sensor Sensor
More Info
Vehicle Fitment
2009 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
FAQ for MAP Sensor Repair
Q: What is the removal procedure for the manifold absolute pressure sensor?
A:
The procedure is to remove the following: the intake manifold sight shield, the MAP sensor retainer, and the MAP sensor.
By Bob
GM Specialist
01/11/2022
Q: What should you do before installing the sensor?
A:
You should lightly coat the MAP sensor seal with clean engine oil before installing the sensor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the throttle body assembly?
A:
The procedure is to remove the following: the air cleaner outlet duct, the Throttle Body nuts and bolts, the throttle body, and the throttle body gasket.
Q: What is the removal procedure for the engine block valley cover?
A:
The procedure is to remove the following: the Intake Manifold, the engine valley cover bolts, the engine valley cover and gasket, the O-ring seals from the cover, and the oil pressure sensor and washer.
Q: How many screws does the air cleaner housing cover have?
A:
The air cleaner housing cover has a total of 4 screws.