Notes: Silverado, Sierra; Intake; Silverado, Sierra Hybrid; Intake
Other Names: Valve Seal
Item Dimensions: 4.2 x 3.1 x 1.6 inches
Item Weight: 0.40 Pounds
Fitment Type: Direct Replacement
Part Description: 2009 GMC Sierra 1500 Valve Seals
More Info
Vehicle Fitment
2009 GMC Sierra 1500 | Base, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Notes: Silverado, Sierra; Exhaust; Silverado, Sierra Hybrid; Exhaust
Other Names: Valve Seal, Valve Spring
Item Dimensions: 4.4 x 2.8 x 1.1 inches
Item Weight: 0.40 Pounds
Fitment Type: Direct Replacement
Part Description: 2009 GMC Sierra 1500 Valve Springs
More Info
Vehicle Fitment
2009 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Part Description: 2009 GMC Sierra 1500 Seal-Exhaust Valve Stem Oil
More Info
Vehicle Fitment
2009 GMC Sierra 1500 | Base, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS
FAQ for Valve Stem Oil Seal Repair
Q: What tool can be used to compress the valve spring?
A:
You can use the J 38606.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when you hand-start the spark plug?
A:
You can tighten the spark plug to 15 Nm (11 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the valve rocker arm and push rod?
A:
The procedure is to remove the following: the rocker arm cover, the number one cylinder spark plug, the rocker arm bolts, the rocker arms, the rocker arm pivot support, and the Pushrods.
Q: What is the removal procedure for the valve lifter oil filter?
A:
The procedure is to remove the following: the intake manifold, the oil pressure sensor and washer, the Valve Lifter oil filter, and the valve lifter oil filter O-ring seal.
Q: What is the removal procedure for the valve rocker arm and push rod?
A:
The procedure is to remove the following: the Rocker Arm cover, the number one cylinder spark plug, the rocker arm bolts, the rocker arms, the rocker arm pivot support, and the pushrods.