< Back ×
2010 Buick Enclave Camshaft
My Vehicle Change Vehicle
2010 Buick Enclave
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2010 Buick Enclave Camshaft
PartNumber: 19431713$260.73 MSRP:$413.98You Save: $153.25 (38%)Product Specifications- Notes: Enclave, Traverse; Intake; Right
- Other Names: Camshaft
- Replaces: 12603535, 19420582, 12603545, 12604374, 12632195, 19420031, 12625989, 12609252
- Part Description: 2010 Buick Enclave Camshaft
Vehicle Fitment- 2010 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
OEM (Genuine) 2010 Buick Enclave Camshaft, Exhaust
PartNumber: 12625988$241.08 MSRP:$398.92You Save: $157.84 (40%)Product Specifications- Notes: Enclave, Traverse; Exhaust; Right
- Other Names: Camshaft
- Item Dimensions: 27.8 x 3.4 x 3.5 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19431714
- Part Description: 2010 Buick Enclave Camshaft, Exhaust
Vehicle Fitment- 2010 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
OEM (Genuine) 2010 Buick Enclave CAMSHAFT ASM, EXH
PartNumber: 19420582$260.73 MSRP:$413.98You Save: $153.25 (38%)Product Specifications- Other Names: Camshaft
- Fitment Type: Direct Replacement
- Replaced by: 19431713
- Part Description: 2010 Buick Enclave CAMSHAFT ASM, EXH
OEM (Genuine) 2010 Buick Enclave Camshaft Asm-Exhaust
PartNumber: 12625984$190.80 MSRP:$302.95You Save: $112.15 (38%)Product Specifications- Notes: Enclave, Traverse; Exhaust; Left
- Other Names: Camshaft
- Item Dimensions: 21.0 x 2.6 x 2.7 inches
- Item Weight: 5.30 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19433783
- Part Description: 2010 Buick Enclave Camshaft Asm-Exhaust
Vehicle Fitment- 2010 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
Product Specifications- Notes: Enclave, Traverse; Intake; Left
- Other Names: Camshaft
- Item Dimensions: 3.3 x 3.4 x 28.6 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12609250, 12604377, 12603544, 12632193
- Part Description: 2010 Buick Enclave Camshaft Asm-Intake
Vehicle Fitment- 2010 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
FAQ for Camshaft Repair
Q: What should be done before servicing the Camshaft Position Actuator?
A:
Remove the intake manifold.
By Bob
GM Specialist
29/10/2022Q: What should be noticed when servicing the Camshaft Position Actuator?
A:
Ensure the proper camshaft position actuator is installed in the correct position.
By Bob
GM Specialist
29/10/2022Q: What special tool will I need when servicing the Camshaft Position Actuator?
A:
You will need a timing chain retention tool.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the Camshaft Position Actuator?
A:
Remove the right-hand secondary camshaft intermediate drive chain. Use an open-end wrench on the hex cast into the camshaft to prevent engine rotation when loosening the camshaft position actuator bolt. Remove the right exhaust camshaft position actuator bolt. Remove the right exhaust camshaft position actuator. Remove the camshaft thrust washer, if applicable.
By Bob
GM Specialist
29/10/2022Q: What is the installation procedure for the Camshaft Position Actuator?
A:
Install the exhaust camshaft position actuator. Install the right-side secondary camshaft intermediate drive chain.
By Bob
GM Specialist
29/10/2022