< Back ×
My Vehicle Change Vehicle
2010 Buick Enclave
< Back to View All
Steering Systems
- Department
- Prices
OEM (Genuine) 2010 Buick Enclave Angle Sensor
PartNumber: 25853012
Product Specifications- Notes: W/O Power Adjust, 2ND Design; W/Power Adjust, 2ND Design
- Other Names: Angle Sensor, Position Sensor
- Item Dimensions: 4.1 x 2.7 x 2.6 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Buick Enclave Angle Sensor
Vehicle Fitment- 2010 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
FAQ for Steering Angle Sensor Repair
Q: What should be done before servicing the Steering Angle Sensor?
A:
Remove the inflatable restraint steering wheel module coil.
By Bob
GM Specialist
01/11/2022Q: How can you complete the EBCM, Steering Position Sensor Calibration procedure?
A:
Align the front wheels in the center forward position. Apply the parking brake, or set the transmission in the PARK position. Turn the ignition switch ON, with the engine OFF. Clear any DTCs that may be set. Using a scan tool, perform the EBCM, Special Functions, Steering Pos. Sensor Calibration. Follow the scan tool directions to complete the calibration procedure. After the procedure is complete, press Exit and cycle the ignition OFF, open the driver door to cancel the Retained Accessory Power, and wait one minute. Cycle the ignition ON and clear all DTCs.
By Bob
GM Specialist
01/11/2022