< Back ×
My Vehicle Change Vehicle
2010 Cadillac Escalade ESV
< Back to View All
Fuel Systems
- Department
- Prices
OEM (Genuine) 2010 Cadillac Escalade ESV Fuel Gauge Sending Unit
PartNumber: 19257106
Product Specifications- Notes: 1/2 Ton, W/Flex Fuel
- Item Dimensions: 7.0 x 4.6 x 4.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19168708, 19206479
- Part Description: 2010 Cadillac Escalade ESV Fuel Gauge Sending Unit
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$112.07 MSRP:$211.48You Save: $99.41 (48%)
FAQ for Fuel Level Sensor Repair
Q: What is the removal procedure for the fuel level sensor (2500-43.5L (11.5 gals) Tank-Rear)?
A:
The procedure is to remove the fuel tank module, disconnect the fuel level sensor electrical connector from under the module cover, release the level sensor retaining clip, and then slide the fuel level sensor down off the bucket.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel level sensor?
A:
The procedure is to remove the fuel tank module, disengage the retainers and slide the fuel level sensor up, remove the fuel level sensor from the module, and then disconnect the fuel level sensor electrical connectors.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the fuel level sensor (2500-98.4L (26 gals) Tank-Front)?
A:
The proper way is to slide the fuel level sensor up onto the bucket until the sensor engages the retaining tab, connect the fuel level sensor electrical connector under the module cover, and then install the fuel tank module.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel level sensor (2500-98.4L (26 gals) Tank-Front)?
A:
The procedure is to remove the fuel tank module, disconnect the fuel level sensor electrical connector from under the module cover, release the fuel level sensor retaining clip, and then slide the fuel level sensor down off of the bucket.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the fuel level sensor?
A:
The proper way is to connect the fuel level sensor electrical connectors, install the fuel level sensor to the module, position and slide the fuel level sensor down until the retainers engage the sensor, and then install the fuel tank module.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the fuel level sensor (2500-43.5L (11.5 gals) Tank-Rear)?
A:
The proper way is to slide the fuel level sensor up onto the bucket until the sensor engages the retaining tab, connect the fuel level sensor electrical connector under the module cover, and then install the fuel tank module.
By Bob
GM Specialist
01/11/2022See more FAQs (1)