< Back ×
My Vehicle Change Vehicle
2010 Cadillac Escalade ESV
< Back to View All
Oil Filters, Pans, Pumps & Related Parts
- Department
- Brands
- Prices
OEM (Genuine) 2010 Cadillac Escalade ESV Oil Pan
PartNumber: 12640746
Product Specifications- Notes: Escalade Esv
- Other Names: Oil Pan
- Item Dimensions: 25.4 x 12.5 x 12.6 inches
- Item Weight: 5.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12619776, 12627903
- Part Description: 2010 Cadillac Escalade ESV Oil Pan
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$220.95 MSRP:$365.72You Save: $144.77 (40%)
Spectra Premium® New Design Engine Oil Pan Without Gaskets for 2010 Cadillac Escalade ESV
PartNumber: GMP53CProduct Specifications- Baffled: Yes
- Dipstick Port: No
- Drain Plug Thread Size: M12 X 1.75
- Item Grade: OEM Standard
- Kicked Out: No
- Material: Aluminum Casting
- Oil Pan Capacity (qt): 6.0
- Oil Pan Depth: 7.25
- Sump Location: Rear
- Sump Style: Wet
- UPC: 671607016512
- Part Description: 2010 Cadillac Escalade ESV New Design Engine Oil Pan Without Gaskets
Vehicle Fitment- 2010 Cadillac Escalade ESV | All Trims | 8 Cyl 6.2L
$119.15
OEM (Genuine) 2010 Cadillac Escalade ESV Oil Pan
PartNumber: 24222657
Product Specifications- Notes: 6 Speed, 1/2 Ton
- Other Names: Oil Pan, Transmission Pan
- Item Dimensions: 19.7 x 13.0 x 5.7 inches
- Item Weight: 4.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac Escalade ESV Oil Pan
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$20.20 MSRP:$33.48You Save: $13.28 (40%)
FAQ for Oil Pan Repair
Q: What is the removal procedure for the oil pan?
A:
The procedure is to raise and support the vehicle, remove the 2 front oil pan skid plate bolts and skid plate, remove the oil pan drain plug, remove the oil filter, remove the right side transmission cover bolt, remove the left side transmission cover bolt and cover, remove the battery cable channel bolt, remove the transmission oil cooler line clip bolt and the clip from the oil pan, remove the oil pan, and then remove the oil pan gasket from the pan.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the oil pan skid plate?
A:
The proper way is to position the oil pan skid plate on the frame, install the oil skid plate mounting bolts, tighten it to 28 Nm (21 lb-ft), and then lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the oil pan skid plate?
A:
The procedure is to raise and support the vehicle, remove the mounting bolts for the oil pan skid plate, and then remove the oil pan skid plate.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the oil pan cover?
A:
The procedure is to raise and suitably support the vehicle, remove the oil pan cover bolts, cover, and gasket, and then discard the gasket.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the oil pan?
A:
The proper way is to install an oil pan bolt into an oil pan bolt hole and up through the gasket, install the battery cable channel bolt, install the right-side transmission cover bolt, start the engine and inspect for leaks.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the oil pan cover?
A:
The proper way is to position a NEW oil pan cover gasket and the cover to the oil pan and install the bolts, tighten the bolts to 12 Nm (106 lb in), and then lower the vehicle.
By Bob
GM Specialist
01/11/2022See more FAQs (1)