< Back ×
My Vehicle Change Vehicle
2010 Cadillac Escalade ESV
< Back to View All
Cameras & Driver Safety
- Department
- Prices
OEM (Genuine) 2010 Cadillac Escalade ESV Reverse Sensor
PartNumber: 15239247
Product Specifications- Notes: Reverse Sensing System
- Other Names: Alarm, Park Sensor, Reverse Sensor, Sensor
- Item Dimensions: 4.8 x 2.3 x 1.9 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19116085
- Part Description: 2010 Cadillac Escalade ESV Reverse Sensor
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$162.05 MSRP:$244.48You Save: $82.43 (34%)
OEM (Genuine) 2010 Cadillac Escalade ESV Object Sensor
PartNumber: 20823460
Product Specifications- Notes: Side Object System
- Location: Driver Side; Passenger Side
- Other Names: Module, Object Sensor, Sensor
- Item Dimensions: 5.6 x 4.6 x 1.4 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999430, 25978649, 25910830, 20759899, 01999430
- Part Description: 2010 Cadillac Escalade ESV Object Sensor
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
$422.21 MSRP:$636.96You Save: $214.75 (34%)
FAQ for Parking Sensors Repair
Q: What is the procedure for the rear object sensor housing?
A:
The procedure is to remove the rear fascia, remove the sensor from the sensor housing, sand/grind sonic weld plastic residue from the fascia, apply structural adhesive epoxy, Lord Fusor(TM) 127EZ or equivalent, to fascia at the mating surface, install the sensor housing to the fascia, install the sensor to the sensor housing, and then install the rear fascia.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the rear object sensor?
A:
The procedure is to remove the rear bumper fascia, disconnect the electrical from the rear object sensor, and then lift the locking tabs on the housing and remove the rear object sensor.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the rear object sensor?
A:
The proper way is to paint the rear object sensor, ensure the paint does not exceed 6 mils, insert the sensor into the housing, and then install the rear bumper fascia.
By Bob
GM Specialist
02/11/2022Q: What should be done before replacing the rear object alarm module?
A:
You should remove the front passenger bucket seat.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear object alarm module nut?
A:
The recommended torque is 2 Nm (18 LB in).
By Bob
GM Specialist
01/11/2022Q: How many nuts does the rear object alarm module have?
A:
The rear object alarm module has 3 nuts.
By Bob
GM Specialist
01/11/2022See more FAQs (1)