< Back ×
My Vehicle Change Vehicle
2010 Cadillac Escalade ESV
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2010 Cadillac Escalade ESV Adjust Switch
PartNumber: 12451495
Product Specifications- Notes: Bucket Seat, Passenger Seat, W/O Power Lumbar; Split Bench Seat, Driver Seat; Bucket Seat, Driver Seat, W/O Power Lumbar
- Item Dimensions: 4.2 x 1.9 x 1.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac Escalade ESV Adjust Switch
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$44.80 MSRP:$67.58You Save: $22.78 (34%)
FAQ for Seat Heater Switch Repair
Q: What should be done before replacing the front seat climate control module?
A:
You should remove the front passenger seat.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Heated Seat Module nut?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How many nuts does the heated seat module have?
A:
The heated seat module has 4 nuts.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the front seat heater switch?
A:
The procedure is to remove the door upper trim panel, pull the door trim panel away from the door and support the bottom of the trim panel on the door panel hooks, disconnect the electrical connector, remove the front side door heater switch fasteners, and then remove the front side door heater switch assembly.
By Bob
GM Specialist
01/11/2022Q: How many screws does the rear seat heater module have?
A:
The rear seat heater module has 2 screws.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the front seat heater switch?
A:
The proper way is to install the front side door heater switch assembly, install the front side door heater switch fasteners and tighten to 2 Nm (18 lb in), connect the electrical connector, and then install the door trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear seat heater module screw?
A:
The recommended torque is 3 Nm (25 LB in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the front seat climate control module bolt?
A:
The recommended torque is 9 Nm (80 LB in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the passenger heated seat module nut?
A:
The recommended torque is 9 Nm (80 LB in).
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the passenger seat cushion ventilation heating and cooling module?
A:
You should remove the front passenger seat, and then remove the passenger seat cushion cover and pad.
By Bob
GM Specialist
01/11/2022See more FAQs (9)