< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2010 Cadillac SRX AC Tube Seal
PartNumber: 13579648
Product Specifications- Notes: 11Mm Id X 19Mm Od
- Item Dimensions: 1.3 x 1.4 x 0.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24436646, 52474373, 15232223
- Part Description: 2010 Cadillac SRX AC Tube Seal
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$10.01 MSRP:$18.86You Save: $8.85 (47%)
Four Seasons® A C System O Ring And Gasket Kit for 2010 Cadillac SRX
PartNumber: 26812Product Specifications- Notes: O-Ring and Gasket Seal Kit
- Material: Green Rubber O-Rings
- Style: O-Ring & Gasket Kit
- UPC: 096361268128
- Part Description: 2010 Cadillac SRX A C System O Ring And Gasket Kit
Vehicle Fitment- 2010 Cadillac SRX | All Trims | All Engines
$7.22
OEM (Genuine) 2010 Cadillac SRX AC Tube Seal
PartNumber: 52477087
Product Specifications- Notes: 8Mm Id X 16Mm Od
- Item Dimensions: 1.2 x 1.2 x 0.2 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 13579649
- Part Description: 2010 Cadillac SRX AC Tube Seal
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$11.34 MSRP:$20.50You Save: $9.16 (45%)
OEM (Genuine) 2010 Cadillac SRX SEAL, A/C Refrigerant Lines
PartNumber: 52474375
Product Specifications- Notes: 17Mm Id X 25Mm Od
- Item Dimensions: 1.6 x 0.6 x 0.2 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24436645, 2724966, 31028254, 02724966
- Part Description: 2010 Cadillac SRX SEAL, A/C Refrigerant Lines
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$3.11 MSRP:$6.52You Save: $3.41 (53%)
OEM (Genuine) 2010 Cadillac SRX Pressure Sensor Seal
PartNumber: 20795535
Product Specifications- Other Names: Pressure Sensor Seal
- Item Dimensions: 1.0 x 1.0 x 0.2 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Pressure Sensor Seal
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$9.27 MSRP:$16.85You Save: $7.58 (45%)
FAQ for A/C System Seal Kit Repair
Q: What should be done before installing the A/C Coupler O-ring seal?
A:
You need to inspect the new O-ring seal for any signs or cracks, cuts, or damage.
By Bob
GM Specialist
28/10/2022Q: What should we do when we remove the air conditioner's O-ring seal?
A:
We should first disassemble the A/C refrigerant components and remove the O-ring seal from the A/C refrigerant component. Then, we should inspect the O-ring seal for signs of damage to help determine the root cause of the failure and inspect the A/C refrigerant components for damage or burrs. After that, we should cap or tape the A/C refrigerant components and finally discard the O-ring seal.
By Bob
GM Specialist
28/10/2022Q: What do we need to note when we install the A/C refrigerant components?
A:
Flat washer-type seals do not require lubrication.
By Bob
GM Specialist
28/10/2022Q: What do we need to note when we inspect the A/C refrigerant components for damage or burrs during the removal procedure?
A:
You need to cap or tape the open A/C refrigerant components immediately to prevent system contamination.
By Bob
GM Specialist
28/10/2022Q: What should we do to remove the air conditioning system seal?
A:
You should first remove the seal washer from the A/C refrigerant component. Then, you should inspect the seal washer for any signs of damage and inspect the A/C refrigerant components for damage or burrs. After that, you should discard the sealing washer.
By Bob
GM Specialist
28/10/2022Q: What do we need to note when we clean the sealing surfaces of the A/C refrigerant components?
A:
You should not allow any of the mineral base 525 viscosity refrigerant oil on the new O-ring seal to enter the refrigerant system.
By Bob
GM Specialist
28/10/2022Q: What do we need to note when we inspect the A/C refrigerant components for damage or burrs?
A:
You should avoid reusing the sealing washer.
By Bob
GM Specialist
28/10/2022See more FAQs (2)