< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
Light Relays, Switches & Control Modules
- Department
- Prices
OEM (Genuine) 2010 Cadillac SRX Module
PartNumber: 13586043
Product Specifications- Notes: Srx
- Other Names: Body Control Module, Control Module, Module
- Item Dimensions: 6.1 x 3.1 x 11.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 13534182
- Part Description: 2010 Cadillac SRX Module
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX
$106.93 MSRP:$222.04You Save: $115.11 (52%)
OEM (Genuine) 2010 Cadillac SRX Antitheft Module
PartNumber: 13504287
Product Specifications- Item Dimensions: 4.2 x 3.1 x 3.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 13523276
- Part Description: 2010 Cadillac SRX Antitheft Module
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$40.41 MSRP:$76.27You Save: $35.86 (48%)
OEM (Genuine) 2010 Cadillac SRX Module
PartNumber: 20928121
Product Specifications- Notes: Park Sensing System; Srx
- Other Names: Control Module, Module
- Item Dimensions: 6.5 x 4.2 x 4.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20895445
- Part Description: 2010 Cadillac SRX Module
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX
$65.48 MSRP:$99.25You Save: $33.77 (35%)
OEM (Genuine) 2010 Cadillac SRX Keyless Entry Control Module Assembly
PartNumber: 13578647
Product Specifications- Notes: W/O Passive Entry
- Other Names: Control Module, Module
- Item Dimensions: 6.5 x 5.6 x 1.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 13577130, 13504819
- Part Description: 2010 Cadillac SRX Keyless Entry Control Module Assembly
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX
FAQ for Body Control Module Repair
Q: How many bolts attaching the body control module bracket are there?
A:
There are 2 bolts.
By Bob
GM Specialist
01/11/2022Q: How to update campaign-BCM for lighting calibration?
A:
You should not attempt to order the calibration number from GM customer care and after-sales. When reprogramming, you should ensure that it is updated with the latest software version and use TIS2WEB on or after 10/28/10 to obtain the calibration. If you cannot access the calibration, you should call the techline customer support center and it will be provided. You should verify that there is a battery charge of 12 to 15 volts. The battery must be able to maintain a charge during programming. Then, you should reprogram the body control module (BCM) and clear all DTCs using Tech 2(R) or GDS.
By Bob
GM Specialist
01/11/2022Q: How to replace the body control module bracket?
A:
You should remove the body control module.
By Bob
GM Specialist
01/11/2022Q: How many nuts attach to the body control module bracket?
A:
There are 2 nuts that attach the body control module bracket.
By Bob
GM Specialist
01/11/2022Q: How to remove the body control module?
A:
First, you should remove the driver knee bolster panel. Then, you should disconnect the electrical connectors and push tabs to release the body control module from the bracket. After that, you should reprogram the module if it has been replaced.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the body control module bracket bolts?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How to replace the mobile telephone control module?
A:
You should remove the instrument panel compartment, disconnect electrical connections, and program and set up procedures.
By Bob
GM Specialist
29/10/2022Q: How to replace the communication interface module?
A:
First, you should remove the communication interface module bracket. After that, you should disconnect the electrical connections. If replacing the communication interface module, you should be sure to transfer the Bluetooth antenna, if equipped. For programming and set-up procedures, you can refer to Control Module References.
By Bob
GM Specialist
29/10/2022Q: How to replace the communication interface module bracket?
A:
You should first remove the instrument panel compartment. After that, you should disconnect the electrical connector and transfer components as necessary.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the communication interface module bracket nut?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
29/10/2022See more FAQs (10)