< Back ×
2010 Cadillac SRX Coolant Hose
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2010 Cadillac SRX Upper Hose
PartNumber: 20795716$62.22 MSRP:$93.87You Save: $31.65 (34%)Product Specifications- Notes: Srx; 3.0 Liter
- Other Names: Upper Hose
- Item Dimensions: 5.3 x 2.4 x 20.5 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Upper Hose
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
OEM (Genuine) 2010 Cadillac SRX Lower Hose
PartNumber: 19257724$49.54 MSRP:$74.73You Save: $25.19 (34%)Product Specifications- Notes: Srx; 3.0 Liter
- Other Names: Lower Hose
- Item Dimensions: 21.4 x 8.8 x 5.0 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20795756
- Part Description: 2010 Cadillac SRX Lower Hose
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Product Specifications- Notes: 2.8 Liter, Rear
- Other Names: Lower Hose
- Item Dimensions: 6.9 x 2.5 x 2.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Hose-Radiator Outlet Rear
Vehicle Fitment- 2010 Cadillac SRX | Performance, Premium | 6 Cyl 2.8 L GAS
Product Specifications- Notes: Srx; 2.8 Liter, Front
- Other Names: Upper Hose
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Radiator Inlet Hose (Upper)
Vehicle Fitment- 2010 Cadillac SRX | Performance, Premium | 6 Cyl 2.8 L GAS
Product Specifications- Notes: Srx; 2.8 Liter, Front
- Other Names: Lower Hose
- Item Dimensions: 7.2 x 2.6 x 2.6 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Hose Asm-Radiator Outlet
Vehicle Fitment- 2010 Cadillac SRX | Performance, Premium | 6 Cyl 2.8 L GAS
FAQ for Coolant Hose Repair
Q: How to replace the engine coolant air bleed pipe (LAU)?
A:
You should remove the intake manifold cover.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the engine coolant air bleed nut?
A:
The recommended torque for the engine coolant air bleed nut is 10 Nm (7 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to replace the heater outlet pipe (LAU)?
A:
You should drain the cooling system, raise and support the vehicle and remove the catalytic converter, the transmission heat shield, the radiator surge tank outlet hose, and the heater outlet hose.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the heater outlet pipe retainer bolt?
A:
The recommended torque is 10 Nm (7 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the engine coolant air bleed pipe retainer bolt?
A:
The recommended torque for the engine coolant air bleed pipe retainer bolt is 10 Nm (7 lb-ft).
By Bob
GM Specialist
01/11/2022