< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
OEM (Genuine) 2010 Cadillac SRX Differential
PartNumber: 22897038
Product Specifications- Notes: Srx; W/AWD
- Other Names: Differential
- Item Dimensions: 18.0 x 17.3 x 15.8 inches
- Item Weight: 48.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20986534
- Part Description: 2010 Cadillac SRX Differential
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$1890.47 MSRP:$2547.81You Save: $657.34 (26%)
OEM (Genuine) 2010 Cadillac SRX Clutch, Limited Slip Differential
PartNumber: 22863114
Product Specifications- Notes: Srx; W/AWD
- Other Names: Case, Clutch
- Item Dimensions: 11.8 x 9.6 x 7.8 inches
- Item Weight: 10.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20986536, 13280076
- Part Description: 2010 Cadillac SRX Clutch, Limited Slip Differential
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX
OEM (Genuine) 2010 Cadillac SRX Differential Carrier Assembly
PartNumber: 23221507
Product Specifications- Notes: SRX; 3.0L; W/AWD, 3.0 Liter
- Other Names: Carrier, Differential Assembly
- Item Dimensions: 18.2 x 19.4 x 12.9 inches
- Item Weight: 70.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20853417, 22874990, 22986668, 22931260, 20935921, 20889155, 22820105, 22824224, 20986533, 20957827
- Part Description: 2010 Cadillac SRX Differential Carrier Assembly
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX
OEM (Genuine) 2010 Cadillac SRX Differential Carrier Assembly
PartNumber: 23221505Product Specifications- Notes: SRX; 2.8L; Code 6532;SRX; 2.8L; Code 7826; W/AWD, 2.8 Liter
- Other Names: Carrier, Differential Assembly
- Item Dimensions: 18.2 x 20.2 x 12.4 inches
- Item Weight: 73.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20904166, 22874989, 20986532, 22986667, 20935920, 22820104, 22931259, 22824223, 20957826
- Part Description: 2010 Cadillac SRX Differential Carrier Assembly
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
FAQ for Differential Repair
Q: How many springs attach to the limited-slip differential clutch low-pressure pipe?
A:
There are 2 springs that attach the limited-slip differential clutch low-pressure pipe.
By Bob
GM Specialist
01/11/2022Q: How to replace differential oil?
A:
You should first raise the vehicle and ensure the vehicle is at the level. Then, you should inspect the rear axle for leaks and repair it if necessary. After that, you should clean the area around the rear axle fill plug. Finally, you should add lubricant until the level is even with the bottom edge of the fill plug opening.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear axle fastener?
A:
The recommended torque is 30 Nm (22 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to replace the differential clutch?
A:
You should remove the rear differential assembly from the vehicle and the limited slip differential clutch pipes if needed, check or fill the oil level in the rear differential clutch, and program the rear differential clutch control module.
By Bob
GM Specialist
01/11/2022Q: How many fasteners attach to the rear axle?
A:
There are 4 fasteners that attach the rear axle.
By Bob
GM Specialist
01/11/2022Q: How many O-rings attach to the differential clutch pump?
A:
There are 2 O-rings that attach the differential clutch pump.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the lubricant fill plug?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to replace the differential clutch oil filter?
A:
You should raise and support the vehicle, remove the exhaust muffler assembly and wait for at least 10 minutes before removing any parts from the differential clutch to prevent personal injury. Then, you should tighten the differential clutch cover bolts twice in a star pattern to ensure proper sealing around the accumulator. Finally, you should remove the vent hose, remove and discard the gasket and replace it with new only, ensure that the sealing surface is clean and free of any foreign material and fill the differential clutch with fluid.
By Bob
GM Specialist
01/11/2022Q: How to replace the differential clutch oil?
A:
You should raise and support the vehicle, remove the vent hose and the fitting from the differential clutch cover and the differential clutch cover to drain the differential clutch, install the differential clutch cover, fill the differential clutch with 350 ml (12 ounces) of the proper differential fluid and install the vent hose and fitting. Then, you should remove the supports, lower and start the vehicle and allow it to run for 5 minutes at idle, cycle the throttle to wide open throttle briefly 5 times to cycle solenoids to purge air, shut the vehicle off, raise the vehicle, remove the differential clutch cover plug, install the differential clutch cover plug and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the lubricant drain plug?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (20)