< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
Fuses & Fuse Box
- Department
- Prices
OEM (Genuine) 2010 Cadillac SRX Fuse Box
PartNumber: 15930594
Product Specifications- Notes: Engine Compartment
- Other Names: Fuse Box
- Item Dimensions: 5.6 x 4.4 x 10.7 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Fuse Box
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$72.64 MSRP:$115.36You Save: $42.72 (38%)
OEM (Genuine) 2010 Cadillac SRX Fuse & Relay Box
PartNumber: 15896994
Product Specifications- Notes: Engine Compartment, 3.0 Liter, W/O Hid
- Other Names: Fuse & Relay Box
- Item Dimensions: 15.8 x 9.3 x 5.7 inches
- Item Weight: 3.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Fuse & Relay Box
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS
$274.70 MSRP:$497.22You Save: $222.52 (45%)
OEM (Genuine) 2010 Cadillac SRX Fuse & Relay Box
PartNumber: 20861268
Product Specifications- Notes: Rear Body, W/Remote Fuel Door
- Other Names: Fuse & Relay Box
- Item Dimensions: 17.2 x 7.5 x 4.3 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Fuse & Relay Box
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
$128.40 MSRP:$203.87You Save: $75.47 (38%)OEM (Genuine) 2010 Cadillac SRX Fuse & Relay Box
PartNumber: 20861267Product Specifications- Notes: Rear Body, W/O Remote Fuel Door
- Other Names: Fuse & Relay Box
- Item Dimensions: 17.3 x 7.8 x 4.4 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Fuse & Relay Box
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
$27.34 MSRP:$43.42You Save: $16.08 (38%)OEM (Genuine) 2010 Cadillac SRX Fuse & Relay Box
PartNumber: 15896995Product Specifications- Notes: Engine Compartment, 3.0 Liter, W/Hid
- Other Names: Fuse & Relay Box
- Item Dimensions: 15.7 x 9.4 x 5.7 inches
- Item Weight: 3.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Fuse & Relay Box
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS
OEM (Genuine) 2010 Cadillac SRX Fuse & Relay Box
PartNumber: 20819065Product Specifications- Notes: Engine Compartment, 2.8 Liter
- Other Names: Fuse & Relay Box
- Item Dimensions: 16.3 x 9.5 x 5.8 inches
- Item Weight: 3.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Fuse & Relay Box
Vehicle Fitment- 2010 Cadillac SRX | Performance, Premium | 6 Cyl 2.8 L GAS
FAQ for Fuse Box Repair
Q: What is the recommended torque for the body harness terminal nut?
A:
The recommended torque is 12 Nm (106 lb in).
By Bob
GM Specialist
01/11/2022Q: How to replace the fuse block?
A:
You should remove the battery cover, disconnect the negative battery cable and remove the battery positive fuse block cable.
By Bob
GM Specialist
01/11/2022Q: How to replace the accessory wiring junction block?
A:
You should disconnect the battery and remove the windshield washer container filler neck and the accessory wiring junction block cover. To re-install, you should fit together the retainer tabs located on the ends of the cover and push down on the cover until the tabs on the ends of the cover lock into place. Then, you should disconnect the battery positive cable from the junction block by removing the nut, release the junction block retainers and remove the junction block from the base, remove the accessory wiring harness from the accessory wiring junction block retainer, position the junction block retainer base alignment tab to the bracket first and install the nut.
By Bob
GM Specialist
01/11/2022Q: How to replace the instrument panel wiring harness junction block?
A:
You should remove the front floor console extension, disconnect the battery, remove the block assembly including the cover from the bracket, unsnap the cover from the block housing, and extract terminals from the block housing.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the battery-positive fuse block nut?
A:
The recommended torque is 12 Nm (106 lb in).
By Bob
GM Specialist
01/11/2022Q: How to replace the M6 weld nut?
A:
You should first use GM-approved residue-free solvent to remove any grease from the surface surrounding the weld nut and allow it to dry and remove any loose metal particles from the damaged or stripped weld nut with a stiff brush. Then, you should use a small brush to apply Dielectric Lubricant GM P/N 12377900 (Canadian P/N 10953529) to the new, conductive, self-threading M7 bolt. After that, you should carefully remove any corrosion from the electrical ground terminal and install the electrical ground terminal to the new, conductive M7 bolt and the M7 bolt and tighten to 9 Nm (80 lb in). Finally, you should check for proper system operation.
By Bob
GM Specialist
01/11/2022Q: How many nuts attach to the body harness terminal?
A:
There are 4 nuts that attach the body harness terminal.
By Bob
GM Specialist
01/11/2022See more FAQs (2)