< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
Gates® Safety Stripe Hvac Heater Hose for 2010 Cadillac SRX
PartNumber: 28412Product Specifications- Notes: Cut to Length, 18"
- Centerline Length: 50 ft
- End 1 Inside Diameter: 19 mm
- End 2 Inside Diameter: 19 mm
- Material: EPDM
- OE Part Number: 49693
- UPC: 072053066326
- Weight Per Length: 13.20 lbs./Carton
- Working Pressure: 50 PSI
- Part Description: 2010 Cadillac SRX Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2010 Cadillac SRX | All Trims | 6 Cyl 3.0L
$69.54
Gates® Safety Stripe Hvac Heater Hose for 2010 Cadillac SRX
PartNumber: 28409Product Specifications- Notes: Cut to Length, 13"
- Centerline Length: 50 ft
- End 1 Inside Diameter: 10 mm
- End 2 Inside Diameter: .375 in
- Material: EPDM
- OE Part Number: 8899
- UPC: 072053081183
- Weight Per Length: 8.25 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 2010 Cadillac SRX Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2010 Cadillac SRX | All Trims | 6 Cyl 3.0L
$45.42
Gates® Engine Coolant Molded Bypass Hose for 2010 Cadillac SRX
PartNumber: 18020Product Specifications- Notes: Cut to fit
- Centerline Length (in): 9.6"
- Inside Diameter 1 (in): 0.31"
- Number of Branches: 0
- OE Part Number: 42569
- UPC: 072053178029
- Part Description: 2010 Cadillac SRX Engine Coolant Molded Bypass Hose
Vehicle Fitment- 2010 Cadillac SRX | All Trims | 6 Cyl 2.8L
$12.72
FAQ for Heater Hose Repair
Q: How to remove the heater inlet hose (LAU)?
A:
First, you should drain the cooling system and remove the intake manifold cover. Then, you should disengage the tension on the heater inlet hose clamp at the engine using BO 38185-Hose Clamp Pliers. After that, you should remove the heater inlet hose from the engine and release the clip from the quick disconnect and remove the heater inlet hose from the heater core tube. Finally, you should remove the heater inlet hose from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What special tools do we need when we replace the heater inlet hose connector (LAU)?
A:
The special tool you need is BO 38185-hose clamp pliers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bracket heater core inlet tube bolt?
A:
The recommended torque is 2.5 Nm (23 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bracket heater core outlet tube bolt?
A:
The recommended torque is 2.5 Nm (23 lb in).
By Bob
GM Specialist
01/11/2022Q: What special tools do we need when we replace the heater outlet hose (LAU)?
A:
The special tool we need is BO 38185-hose clamp pliers.
By Bob
GM Specialist
01/11/2022Q: How to remove the heater outlet hose (LAU)?
A:
First, you should drain the cooling system and remove the intake manifold cover. Then, you should disengage the tension on the heater outlet hose clamp at the engine using BO 38185-Hose Clamp Pliers. After that, you should remove the heater outlet hose from the engine and release the clip from the quick disconnect and remove the heater outlet hose from the heater core tube. Finally, you should remove the heater outlet hose from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What special tools do we need when we replace the heater outlet hose connector (LAU)?
A:
The special tool you need is BO 38185-hose clamp pliers.
By Bob
GM Specialist
01/11/2022Q: How to replace the heater core inlet tube?
A:
You should remove the heater and air conditioning evaporator case.
By Bob
GM Specialist
01/11/2022Q: How to replace the heater core outlet tube?
A:
You should remove the heater and air conditioning evaporator case.
By Bob
GM Specialist
01/11/2022Q: What special tools do we need when we replace the heater inlet hose (LAU)?
A:
The special tool we need is BO 38185-hose clamp pliers.
By Bob
GM Specialist
01/11/2022See more FAQs (7)