< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Prices
OEM (Genuine) 2010 Cadillac SRX Filler Cap O-Ring
PartNumber: 12572638
Product Specifications- Notes: Srx
- Other Names: Filler Cap O-Ring, Valve Lifters
- Item Dimensions: 3.1 x 3.0 x 3.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 12686787
- Part Description: 2010 Cadillac SRX Filler Cap O-Ring
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$12.98 MSRP:$21.49You Save: $8.51 (40%)
OEM (Genuine) 2010 Cadillac SRX Valve Springs
PartNumber: 12592506
Product Specifications- Notes: Srx
- Other Names: Valve Spring
- Item Dimensions: 2.4 x 1.6 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Valve Springs
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX
$4.54 MSRP:$7.20You Save: $2.66 (37%)OEM (Genuine) 2010 Cadillac SRX Idler Gear
PartNumber: 12686721
Product Specifications- Notes: Srx
- Other Names: Idler Gear, Valve Spring
- Fitment Type: Direct Replacement
- Replaces: 12575355, 12616671
- Part Description: 2010 Cadillac SRX Idler Gear
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$4.91 MSRP:$7.79You Save: $2.88 (37%)
FAQ for Valve Spring Repair
Q: How to remove the valve stem oil seal and valve spring-left side?
A:
You should remove the rocker arms and the starter motor, install the EN 46106 tool to prevent crankshaft rotation, remove the spark plug from the applicable cylinder and install the EN-39313 adapter to the applicable cylinder. Then, you should connect the EN-39313-adapter to a compressed air source, install the EN-46110-compressor above the applicable cylinder, tighten the EN-46110-compressor nut, remove the valve keepers and loosen the EN-46110-compressor nut. Finally, you should remove the valve spring retainer and the valve spring and use the EN-46116-remover/installer to remove the valve stem seal.
By Bob
GM Specialist
02/11/2022Q: How to remove the valve stem oil seal and valve spring-right side?
A:
You should remove the rocker arms and the starter motor, install the EN 46106 tool to prevent crankshaft rotation, remove the spark plug from the applicable cylinder, install the EN-39313-adapter to the applicable cylinder and connect the EN-39313-adapter to a compressed air source. Then, you should install the EN-46110-compressor above the applicable cylinder, tighten the EN-46110-compressor nut, remove the valve keepers and loosen the EN-46110-compressor nut. Finally, you should remove the valve spring retainer and the valve spring and use the EN-46116-remover/installer to remove the valve stem seal.
By Bob
GM Specialist
02/11/2022