< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Avalanche
< Back to View All
Engine Mounts & Mounting Hardware
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Avalanche Mount Asm-Engine
PartNumber: 15854941
Product Specifications- Notes: Avalanche; 5.3L
- Location: Driver Side; Passenger Side
- Other Names: Front Mount, Motor Mount, Mount
- Item Dimensions: 9.2 x 8.4 x 6.9 inches
- Item Weight: 6.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Avalanche Mount Asm-Engine
Vehicle Fitment- 2010 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$125.05 MSRP:$186.56You Save: $61.51 (33%)
Anchor® Front Driver Side Engine Mount for 2010 Chevrolet Avalanche
PartNumber: 3211Product Specifications- Notes: Hyd;PART GROUP: 3211, 3211;REUSE HEAT SHIELD;REUSE PLATE;
- Note: HYDRAULIC; REUSE HEAT SHIELD; REUSE PLATE
- PART GROUP: 3211, 3211
- UPC: 081106032119
- Part Description: 2010 Chevrolet Avalanche Front Driver Side Engine Mount
Vehicle Fitment- 2010 Chevrolet Avalanche | All Trims | 8 Cyl 5.3L
$29.06
Westar® Front Engine Mount for 2010 Chevrolet Avalanche
PartNumber: EM-5583GProduct Specifications- Notes: Gold Line
- UPC: 656591355830
- Part Description: 2010 Chevrolet Avalanche Front Engine Mount
Vehicle Fitment- 2010 Chevrolet Avalanche | All Trims | 8 Cyl 5.3L
$37.19
Westar® Front Engine Mount for 2010 Chevrolet Avalanche
PartNumber: EM-5583Product Specifications- Notes: Available in the Westar Gold Line
- UPC: 656591055839
- Part Description: 2010 Chevrolet Avalanche Front Engine Mount
Vehicle Fitment- 2010 Chevrolet Avalanche | All Trims | 8 Cyl 5.3L
$21.05
Anchor® Engine Mount for 2010 Chevrolet Avalanche
PartNumber: 3484Product Specifications- Notes: Hyd;PART GROUP: 3484, 3484;FULL Assy;
- Note: FULL ASSEMBLY; HYDRAULIC
- PART GROUP: 3484, 3484
- UPC: 081106034847
- Part Description: 2010 Chevrolet Avalanche Engine Mount
Vehicle Fitment- 2010 Chevrolet Avalanche | All Trims | 8 Cyl 5.3L
FAQ for Engine Mount Repair
Q: What is the recommended bolt torque for the engine mount to engine bolts?
A:
The recommended bolt torque is 50 Nm (37 LB-FT).
By Bob
GM Specialist
01/11/2022Q: How do I remove the left-side engine mount bracket?
A:
Start with removing the left-side engine mount. Next, remove the bolts that attach the engine mount bracket. Lastly, remove the bracket.
By Bob
GM Specialist
01/11/2022Q: How do I install the left-side engine mount bracket?
A:
Start with positioning the engine mount bracket onto the frame, remove any traces of the original adhesive patch and clean the threads of the bolt with denatured alcohol or equivalent and allow it to dry. Apply thread locker to the bolts. Next, install the engine bracket bolts and the engine mount.
By Bob
GM Specialist
01/11/2022Q: How many bolts attach to the engine mount?
A:
4 Bolts attach to the engine mount.
By Bob
GM Specialist
01/11/2022Q: When lifting the vehicle's engine where should I avoid placing the jack?
A:
Do not use a jack under the oil pan, any sheet metal, or the crankshaft pulley. Due to the small clearance between the oil pan and the oil pump screen, jacking against the oil pan may cause the pan to be bent against the pump screen.
By Bob
GM Specialist
01/11/2022Q: What will need to be removed if the vehicle is equipped with 4WD?
A:
You will need to remove the front drive axle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended bolt torque for the frame bolts?
A:
The recommended bolt torque is 65 Nm (48 LB-FT).
By Bob
GM Specialist
01/11/2022See more FAQs (2)