2010 Chevrolet Aveo Alternator

Install the Starter, and the starter mounting bolt and tighten to 25 Nm. Tighten the engine ground bolt to 38 Nm, the starter solenoid harness connector nut to 10.5 nm, and the starter solenoid battery positive connector nut to 10.5 Nm.

First, verify all the electrical components are off. Install the battery negative cable to the battery and install the clamping bolt to the negative cable. Tighten the cable to 4.5 Nm. Finally, reset the radio stations and the clock.

First, install the battery carrier and tighten the battery carrier tray upper/lower bolts to 20 Nm. Install the battery into the tray and tighten the battery retainer clamp-to-battery rod nuts to 4 Nm. Finally, connect the negative battery cables and tighten the cable nuts to 4.5 Nm.